Taking out the flywheel
crx hf
12-15-2003, 05:28 PM
KNow that i have my tranny out i wanna take out my flywheel to go get it resurfaced.How do you take it out.I dont have any bolt pattern to take out the bolts that are holding the flywheel.Any thing i should know before i attempt to take it out
EF You
12-15-2003, 10:57 PM
you need a 12 point socket, 17mm i believe
spongerlbc
12-16-2003, 01:23 AM
You will also need a 12 point 10mm socket for the clutch bolts. If you use a normal 6 side socket you might strip them.
Cjz89civic
12-16-2003, 01:39 AM
yep what they said. when you put it back in the flywheel it is the cross pattern also the clutch is the same way.
Automotive Network, Inc., Copyright ©2026