DSM Injectors...
Kunundrum
10-18-2003, 06:56 PM
what DSM injectors fit our cars ?
I know the Turbo talon are 440cc and the non turbo are 370cc but what years ?
thanks
I know the Turbo talon are 440cc and the non turbo are 370cc but what years ?
thanks
91civicDXdude
10-18-2003, 07:30 PM
450cc.. and you will want to get 1g DSM injectors so you can use the factory resistor box.
You will need a way to control the injectors.. there are a couple of ways. One is called the AFC hack. basically you use an AFC (Apexi, Field SFC-VTEC, etc.) to subtract the fuel basically as much as it can go. what this does it two things. One, it makes the car idle as 450cc's worth of fuel with make your idle HORRIBLE. secondly, it scales your map sensor voltage back so that when you hit 1.3PSI you will not throw a CEL.
the second way is to get a chipped ecu. I have a good friend who wrote his own OBD0 Editor, and he just wrote in PR3/PW0 support.. you can get the .bin for free and he can probably burn you a chip as well. Check out his website @ www.turboedit.org.
You will need a way to control the injectors.. there are a couple of ways. One is called the AFC hack. basically you use an AFC (Apexi, Field SFC-VTEC, etc.) to subtract the fuel basically as much as it can go. what this does it two things. One, it makes the car idle as 450cc's worth of fuel with make your idle HORRIBLE. secondly, it scales your map sensor voltage back so that when you hit 1.3PSI you will not throw a CEL.
the second way is to get a chipped ecu. I have a good friend who wrote his own OBD0 Editor, and he just wrote in PR3/PW0 support.. you can get the .bin for free and he can probably burn you a chip as well. Check out his website @ www.turboedit.org.
Automotive Network, Inc., Copyright ©2026