Proportioning Valve CRX 40/40?????

Following my rear disk break swap I changed the master cylinder to the 15/16" EX form my stock 13/15" DX. I still have the DX booster. but I need to change my Proportioning Valve to one for a 4-disk setup, It has "4040" stamped on it. compared to the 2disk2drum one that has "3030" on it. Can someone look at there 90-91 CRX si w/rear disks and see if you Proportioning Valve has "4040" stamped on it? and some on that has a EX 4 door what are the number on you P Valve? Thanks.
I dont thing I can use the Integra one cuze not all the bolts line up.


Integra Valve

http://hybrid2.honda-perf.org/tech/brakepics/img12.jpg

I used the interga one on my swap.

I used the interga one on my swap.


What MasterCylinder and Break booster did you use? What you integ P valve did you use?

What MasterCylinder and Break booster did you use? What you integ P valve did you use?


Everything was from a 91' Integra.

yeah, that pic you posted is 94+ body style, which wont work. the 90-93 will work though.