NEWS FLASH! Hydro Conversion Kit Is OUT!!!
jNYCe5
09-04-2003, 03:41 PM
http://www.hasport.com/Products/Mount%20Kits/Pics/EFB2/efb2600.jpg
The Kit is out from Hasport. Will only work with current billet mount set. If you already have the billet mounts, you can purchase just the mount and linkage separately.
It is very easy to install. If you have a full B18B/C or second gen B16A changeover you will need to use the first gen rear bracket and bracket on the driver-side of the engine. The rear bracket needs the holes enlarged to accept the 14mm bolts that go from the tranny to the rear bracket. It uses one of the existing studs the other one is removed. And you will also have to buy the trans mount.
Axles haven't changed, but if you use the 90-93 Integra or 89-91 SiR intemediate shaft you will need the change the seal where the shaft goes onto the hydro transmission.
*A lot of information given here taken from Brian G. of Hasport.
The Kit is out from Hasport. Will only work with current billet mount set. If you already have the billet mounts, you can purchase just the mount and linkage separately.
It is very easy to install. If you have a full B18B/C or second gen B16A changeover you will need to use the first gen rear bracket and bracket on the driver-side of the engine. The rear bracket needs the holes enlarged to accept the 14mm bolts that go from the tranny to the rear bracket. It uses one of the existing studs the other one is removed. And you will also have to buy the trans mount.
Axles haven't changed, but if you use the 90-93 Integra or 89-91 SiR intemediate shaft you will need the change the seal where the shaft goes onto the hydro transmission.
*A lot of information given here taken from Brian G. of Hasport.
SiZ
09-04-2003, 04:25 PM
That is fucking awesome news!! :smokin:
[starts looking for an ITR tranny]
[starts looking for an ITR tranny]
jNYCe5
09-04-2003, 04:39 PM
That is fucking awesome news!! :smokin:
[starts looking for an ITR tranny]
figured you would be one of the first ones interested. Im already ahead of you in the search though :evillol:
i have a supplier :smokin:
[starts looking for an ITR tranny]
figured you would be one of the first ones interested. Im already ahead of you in the search though :evillol:
i have a supplier :smokin:
SiZ
09-04-2003, 09:21 PM
Ya, and I'm broke as fVck right now.. My car is smashed again and I'm selling my rims so I can afford to fix it..
BUT if I come across an ITR tranny this winter I willlllll be picking one up.. Mmmm.. S1 gearing without the grinds + an LSD. :D :D :D
BUT if I come across an ITR tranny this winter I willlllll be picking one up.. Mmmm.. S1 gearing without the grinds + an LSD. :D :D :D
Automotive Network, Inc., Copyright ©2026