Bmw m3 e30

Hello guys!
This summer was not productive for modeling.
But I had long ago begun to M3 body. And I'm almost done with the body work.
It was used a set of Studio 27, a set of Fujimi , and a set of Renaissance.
I tried to use the best parts of those sets. Thus, the body of Fujmi was completely cut and pasted together again. The rear part is used from the Renaissance. The front bumper of the Studio 27 with the changes.
I plan to have a full chassis and engine. To do this, I will use part of the BMW M6 and BMW Z3 from Tamiya.
And I'm planning that it will set the resin in two versions, for rallying and circuit races

http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094853.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094854.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094855.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094856.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094857.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094859.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094861.jpg

Looks awesome Roman.....

Count me in for a couple... :-)

very good Roman ...

I also am in the list:grinno:

Great car ! A best seller for sure !

I'm tuned in. Nice work so far, Roman. Keep the updates coming please ;)

Yes, looks great. If you end up making sets for sale, I will order one right away. Keep us posted.

great work Roman. so nice also u working on this nice car.

It seems we will have correct E30 finally !! I'll get one....or two!!!
thanks for it!!

And now we can see an M3 with the correct height of the roof....:thumbsup:

Well done,Roman!

Outstanding job. Very well done, Roman :iceslolan

Oh yes! This is awesome news! Count me in for one or two rally versions.
For sure! THANK YOU!

I like this project! I would like to have two of them!

Great work Roman and good news. I will order one right away.

Hello guys!
Thank you for your interest.
There is still work to the body. And I started doing undercarriage. As soon as the result will be, I will show.

Interesting project ! I suppose that you are expecting to do rally versions ?
I have the Renaissance model, so I'm curious to see yours done and will surely get one !

Hello!
Connected parts of the bottom. The front part of the BMW M6 Tamiya. Then, a part of Studio 27. And the rear part of the Z3 Tamiya.
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133135896.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133135895.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133135897.jpg

Front suspension of parts of the M6 and Z3
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133135900.jpg
Rear suspension from Z3
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133135899.jpg

The rear part of the P3 is very short, so I'm making a new boot floor and a niche for the spare wheel.
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133135901.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133135902.jpg

Amazing build Roman!

congratulations!

Yes, incredible how you mix donor models to get what you're expecting, superb work as always :thumbsup:

Ah aha, you're crazy my friend! But how accurate is this mix? Not that I feel too concerned about that... Just curious ;)

Ah aha, you're crazy my friend! But how accurate is this mix? Not that I feel too concerned about that... Just curious ;)

I've been looking to some pics of the under side and suspension of an M3 E30 and I have to say that this is prety accurate actualy. Amazing work as always Roman! Can't wait to see more!

Ah aha, you're crazy my friend! But how accurate is this mix? Not that I feel too concerned about that... Just curious ;)

Hello !
I'm trying to do is similar to the original

http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133158738.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133158726.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133158723.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133158731.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133158735.jpg

Roman are u planning to make also the engine?

una maravilla!!!

Very,very great build,I love it.

Roman you are doing exceptional work as always!
However I think the body still needs some work especially around the front grill, front wings and the bonnet. Maybe the wings need to curve inwards a little more and the grill outside the outer headlights to be a little thinner?
For some reason the rear wings too look to be curving too much inwards to me, but maybe that is an optical illusion.

Anyway i 'm sure you are familiar with stratos75 similar job, who has captured the look of the front area very well wip:http://www.automotiveforums.com/vbulletin/showthread.php?t=1014568

Given the fact that everybody is waiting for a proper kit of this car for ages I 'm sure you ll get this spot on before releasing it to an overeager public, and given the quality of the 4 models I ve already got from you, you wont let us down! (i would absolutely love a road version myself)

B.rgrds
Paul Kabouridis

GTV2000 (http://www.automotiveforums.com/vbulletin/member.php?u=457395): Thanks for your reference to my WIP. You are mostly right. I have already wrote to Roman my comments for his bodywork: http://forum.autoinscale.com/viewtopic.php?pid=216252#p216252

Hello guys.
Yes, I know about some problems with the body. I'll try to make improvements after finish chassis and interior.

Roman, I found the following website that could be useful for you project: http://vinkmotorsport.com/

Looking really good!

Hi guys.
After a long break returned to the M3.
News from Beemax certainly a little upset. Now it is does not sense make to do a set of casting resin. But in any case, I'll finish the model.
* I started to do the engine.


https://img-fotki.yandex.ru/get/15578/198047593.4/0_15e240_a7bfa5_XL.jpg
https://img-fotki.yandex.ru/get/15596/198047593.4/0_15e241_848ddc5a_XL.jpg

Looking good! It might still make sense to cast yours if the Beemax one is going to be less detailed.

Hello guys!
This summer was not productive for modeling.
But I had long ago begun to M3 body. And I'm almost done with the body work.
It was used a set of Studio 27, a set of Fujimi , and a set of Renaissance.
I tried to use the best parts of those sets. Thus, the body of Fujmi was completely cut and pasted together again. The rear part is used from the Renaissance. The front bumper of the Studio 27 with the changes.
I plan to have a full chassis and engine. To do this, I will use part of the BMW M6 and BMW Z3 from Tamiya.
And I'm planning that it will set the resin in two versions, for rallying and circuit races

http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094853.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094854.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094855.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094856.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094857.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094859.jpg
http://romik505.users.photofile.ru/photo/romik505/95192605/xlarge/133094861.jpg
very good Roman ..
http://aaswall.cf/20/o.png

The body looks very good.

I'm working on the rollcage and the Cockpit of my M3 at the moment.
Body decaling will Start next week.

The engine is from a Tamiya BMW 635 Group A.

http://www.automotiveforums.com/vbulletin/showthread.php?t=1138928

Henrik

Hi guys.
After a long break returned to the M3.
News from Beemax certainly a little upset. Now it is does not sense make to do a set of casting resin. But in any case, I'll finish the model.
* I started to do the engine.


https://img-fotki.yandex.ru/get/15578/198047593.4/0_15e240_a7bfa5_XL.jpg
https://img-fotki.yandex.ru/get/15596/198047593.4/0_15e241_848ddc5a_XL.jpg
Well if the Beemax M3 is curbside, I 'd still buy a full detail resin M3 from you, provided of course that the body was corrected as per previous comments.

Good Job, I hope you keep working on the M3

very good Roman
http://aaswall.cf/20/o.png

Hi guys.
I did not come for a long time. The restoration of my E12 takes a lot of time.

https://img-fotki.yandex.ru/get/4107/198047593.4/0_18127b_180bcd9_XL.jpg

https://img-fotki.yandex.ru/get/4129/198047593.4/0_18127c_324fc939_XL.jpg

https://img-fotki.yandex.ru/get/9111/198047593.4/0_18127a_9f1c2668_XL.jpg

But I am a bit work to the M3. A little work with the engine.

https://img-fotki.yandex.ru/get/3603/198047593.4/0_181274_6bf186c5_XL.jpg

https://img-fotki.yandex.ru/get/16189/198047593.4/0_181275_14852009_XL.jpg

https://img-fotki.yandex.ru/get/6831/198047593.4/0_181276_3a83c59e_XL.jpg

https://img-fotki.yandex.ru/get/16143/198047593.4/0_181277_8e6c4873_XL.jpg

https://img-fotki.yandex.ru/get/5212/198047593.4/0_181278_becc7077_XL.jpg

https://img-fotki.yandex.ru/get/6818/198047593.4/0_181279_24febd7f_XL.jpg

Hello Romik,

as usual your work is beautiful!

Never thougth of casting your E12 in scale 1/24?
I'm looking for such a 1/24 model.

Or do you know who has?

Very nice M3.

Regards,
joka-1

Was thinking exactly the same about e21....

Roman as usual your work is beautiful!

I keep hoping you decide to do a kit for sale

Hi guys.
When I learned about the production of the Beemax M3 I put my model away in a box.
And finally, I am holding a long-awaited package.
Of course as I expected engine is no in model . Therefore, part of my work is not in vain.
I do not really like the new chassis model. In any case, the front wheels can not by rotating .

https://img-fotki.yandex.ru/get/51236/198047593.5/0_1f7fa9_754a6e07_XL.jpg

https://img-fotki.yandex.ru/get/196020/198047593.5/0_1f7faa_99dc3f04_XL.jpg

https://img-fotki.yandex.ru/get/196020/198047593.5/0_1f7fab_f449b2ee_XL.jpg

https://img-fotki.yandex.ru/get/47175/198047593.5/0_1f7fa3_92d5f59d_XL.jpg


Since my BMW on a large scale is finished construction , I can devote more time to the models at 1:24

https://img-fotki.yandex.ru/get/169995/198047593.5/0_1f7fbb_55ffe7cf_XL.jpg

First, I compared my parts and pieces Beemax

https://img-fotki.yandex.ru/get/3307/198047593.5/0_1f7fa2_9adfc20f_XL.jpg

https://img-fotki.yandex.ru/get/198026/198047593.5/0_1f7fa5_fe21dcf3_XL.jpg

https://img-fotki.yandex.ru/get/172272/198047593.5/0_1f7fa6_170ed852_XL.jpg





I do not know about plans for the production of other Beemax M3 versions.
Location of parts on the casting tree, I think that involves the production of a different version.
Therefore, I plan to start minimum rework. I plan to adapt my engine for Beemax chassis.
Perhaps the next step will be to prepare my chassis to get a version of the rally.

https://img-fotki.yandex.ru/get/47175/198047593.5/0_1f7fa4_17eb88e4_XL.jpg

https://img-fotki.yandex.ru/get/55918/198047593.5/0_1f7fa7_b5452144_XL.jpg

https://img-fotki.yandex.ru/get/52765/198047593.5/0_1f7fa8_9b1d3056_XL.jpg

great to see you are back on this one.
Looks really great.

I am going to make the Arild Martinsen Bmw M3 turbo 4x4 of rallycross.I start to make the IMSA turbo engine,it was770HP.
Base is the Tamiya BMW320 gr5 engine,and the rest,is made in solidworks and 3D printed,like the valve covers,the inlet manifould,the air filter,the exhaust etc..


http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=54731&stc=1&d=1483460916

Very happy to see you working again on this model.

Any option you decide for sure will increase the quality of the Beemax kit!

I'll be waiting for your M3 E30 Products :smooch:

Excellent Roman..you should cast the engine now..you will be alone on this terrain and from this forum you will have no less than 20 already sold..think about!

Hi guys.
Small update.
Did the engine compartment side wall and strut bar
https://img-fotki.yandex.ru/get/99813/198047593.5/0_1f9846_6fcf5974_XL.jpg

https://img-fotki.yandex.ru/get/95629/198047593.5/0_1f9847_189e116a_XL.jpg

https://img-fotki.yandex.ru/get/113961/198047593.5/0_1f9848_7dcad622_XL.jpg

Excellent...Excellent..We hope you can do a transit for us using this..

Awesome build as usual Romik! :smile:

I am going to make the Arild Martinsen Bmw M3 turbo 4x4 of rallycross.I start to make the IMSA turbo engine,it was770HP.
Base is the Tamiya BMW320 gr5 engine,and the rest,is made in solidworks and 3D printed,like the valve covers,the inlet manifould,the air filter,the exhaust etc..


http://www.automotiveforums.com/vbulletin/attachment.php?attachmentid=54731&stc=1&d=1483460916


Could you show pictures of this engine?

Hey.
Test engine installation.
For installation, you must make a simple work, and cut off part of the engine to the gearbox on the chassis.I think it will not have problems.
I still need to decide how to install radiators.





https://img-fotki.yandex.ru/get/102548/198047593.5/0_1fdb77_497d0fde_XL.jpg

https://img-fotki.yandex.ru/get/117578/198047593.5/0_1fdb78_8bf96dd_XL.jpg

https://img-fotki.yandex.ru/get/56941/198047593.5/0_1fdb79_e46260d4_XL.jpg

https://img-fotki.yandex.ru/get/60537/198047593.5/0_1fdb7e_ceaed12f_XL.jpg
https://img-fotki.yandex.ru/get/164839/198047593.5/0_1fdb7d_7ed5f800_XL.jpg

https://img-fotki.yandex.ru/get/198998/198047593.5/0_1fdb7c_18957dd_XL.jpg
https://img-fotki.yandex.ru/get/109344/198047593.5/0_1fdb7b_53645145_XL.jpg

https://img-fotki.yandex.ru/get/198998/198047593.5/0_1fdb7a_80d005d9_XL.jpg

Oh yes that's great !! :thumbsup:

one question out of the subject... Is your Evo X rally transkit project still running ?

Hello Phil.
Thank you.
Yes, transkit for EVO X available for order.

Hey Roman....Engine transit for M3?...Maybe?

Hi guys !
The main components in place. It is necessary to place some of the tanks and can be prepared for the production of the molding form .
https://img-fotki.yandex.ru/get/58321/198047593.5/0_20f05f_8bc21a5e_XL.jpg

https://img-fotki.yandex.ru/get/195786/198047593.5/0_20f060_3a66e35b_XL.jpg

https://img-fotki.yandex.ru/get/195648/198047593.5/0_20f061_ebfa3377_XL.jpg

Looks great!! Fantastic work!!

Have you thought to include the walls of the engine bay in the same way that in the Lancer Evo VI TK engine?

Looks great!! Fantastic work!!

Have you thought to include the walls of the engine bay in the same way that in the Lancer Evo VI TK engine?

Hello!
Thank you .
The walls will be. But this will be the left and right part. There's no way to do the same as EVO

Great news Roman..waiting for it!

Are you planning to make a bigger BMW M POWER lettering on the head cover or this photo etch plate is just like a mock up?

I am completely agree with Porsnatic (http://www.automotiveforums.com/vbulletin/member.php?u=91974), the lettering on the E30 is much bigger compare to E24.
https://img-fotki.yandex.ru/get/169608/14224223.69/0_cef93_1cd0c7b7_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/104229/view/847763)

I also never saw this type of the intake manifold. I just saw two types of it - the road and the sport version, but they both are different.
https://img-fotki.yandex.ru/get/28256/14224223.69/0_cef91_280014d7_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/104229/view/847761)

https://img-fotki.yandex.ru/get/195648/14224223.69/0_cef92_215ae529_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/104229/view/847762)

https://img-fotki.yandex.ru/get/16178/14224223.69/0_cef90_abb5f0a2_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/104229/view/847760)

https://img-fotki.yandex.ru/get/47175/14224223.69/0_cef95_22b6c7d9_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/104229/view/847765)

https://img-fotki.yandex.ru/get/216915/14224223.69/0_cef94_bf5978ab_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/104229/view/847764)

The cluth house looks too simplified. Look to the original.
https://img-fotki.yandex.ru/get/109793/14224223.69/0_cef96_e3dc56a7_XL.jpg (https://fotki.yandex.ru/next/users/mikhailpetrenko/album/104229/view/847766)

https://s14net.vbulletin.net/filedata/fetch?photoid=1220841&type=thumb