Aux Belt ...installation tip.
12Ounce
05-27-2014, 10:50 PM
INSTALLATION TIP FOR SERPERTINE BELT ... 1999 3.8L
.
Its a bit shameful how/why I discovered the tip I am about to describe. A few years back, I could just use my hands and arms to pull the slack out of the belt tensioner and doing the final fit over the alternator pulley. But today, I discovered my arms are no longer going to do this task for me (perhaps the serpentine belts are shorter now ... that's it, I bet!). And there is little/no wrench room to rotate the tensioner ... so
.
TIP: Remove front and right-rear hold-down bolts for the alternator...then loosen the final, left-rear hold down bolt. Rotate the alternator toward the rear. Now you should be able to pull the belt over the alternator pulley. Using a vertical bar behind the alternator (behind the alternator, down low, you will find a location for the bar's end that suspiciously looks like it was designed for this purpose!), pull the alternator forward until you can re-install the two removed bolts. Be sure to tightened all three bolts..
.
So simple, its almost embarrassing to remember how many times I have wrestled with this chore. I just hope this tip is indeed "news" ... and not known already by everyone else!
.
Its a bit shameful how/why I discovered the tip I am about to describe. A few years back, I could just use my hands and arms to pull the slack out of the belt tensioner and doing the final fit over the alternator pulley. But today, I discovered my arms are no longer going to do this task for me (perhaps the serpentine belts are shorter now ... that's it, I bet!). And there is little/no wrench room to rotate the tensioner ... so
.
TIP: Remove front and right-rear hold-down bolts for the alternator...then loosen the final, left-rear hold down bolt. Rotate the alternator toward the rear. Now you should be able to pull the belt over the alternator pulley. Using a vertical bar behind the alternator (behind the alternator, down low, you will find a location for the bar's end that suspiciously looks like it was designed for this purpose!), pull the alternator forward until you can re-install the two removed bolts. Be sure to tightened all three bolts..
.
So simple, its almost embarrassing to remember how many times I have wrestled with this chore. I just hope this tip is indeed "news" ... and not known already by everyone else!
northern piper
06-09-2014, 04:11 PM
thanks!
Love to avoid the busted knuckles whenever I can
Love to avoid the busted knuckles whenever I can
Automotive Network, Inc., Copyright ©2026