what5 tools do i need to remove and 88ish integra fron lip
Redline_civic91
06-07-2003, 10:27 PM
k i past by this small little junkyard today and i've noticed that this 88 or so year teg is just always parked there in the back outside the junkyard i think its crashed or something but it just sits outside its not even in the junkyard its in the back. im thinking bout running up there and grabing that lip. i know some my flame me for this, but i do intend to ask the guy if thats even there car and how much he would take for the lip. if he says its not for sale then im gonna go to plan b. btw would that lip even fit my 4 door?? k but what tools do i need.
Melt
06-07-2003, 10:31 PM
yes the lip will fit your 4 door ... and I dont know what you need ... 88civic_dx should know cause he put one on his hatch.
Stali08
06-07-2003, 10:33 PM
yea dont dude, just go to groupbuycenter.com and look for some cheap springs
daddys
06-07-2003, 10:35 PM
just bring your ratchet set,,at least thats all i used
Melt
06-07-2003, 10:35 PM
yea dont dude, just go to groupbuycenter.com and look for some cheap springs
wrong thread meng :biggrin2: :iceslolan
http://www.automotiveforums.com/vbulletin/t108789.html
wrong thread meng :biggrin2: :iceslolan
http://www.automotiveforums.com/vbulletin/t108789.html
Redline_civic91
06-07-2003, 10:43 PM
Originally posted by Stali08
yea dont dude, just go to groupbuycenter.com and look for some cheap springs
:loser:
yea dont dude, just go to groupbuycenter.com and look for some cheap springs
:loser:
Stali08
06-07-2003, 10:47 PM
Ha ha....yea :dunno:
91civicDXdude
06-08-2003, 12:19 AM
10mm socket.
GTA
06-08-2003, 01:08 AM
Originally posted by 91civicDXdude
10mm socket.
what he said. try and grab the mounting stuff too the bolts and the things they go into.
10mm socket.
what he said. try and grab the mounting stuff too the bolts and the things they go into.
91civicDXdude
06-08-2003, 01:11 AM
1. remove bolt
2. remove clip that holds bolt
3. remove lip
4. bolt on your car
5. trim edges and drill one hole for the most rear located mounting point.
6. you are done.
2. remove clip that holds bolt
3. remove lip
4. bolt on your car
5. trim edges and drill one hole for the most rear located mounting point.
6. you are done.
MyFirst4G
06-08-2003, 02:51 AM
If you jack it after you specifically aswked him to buy the lip and he says NO, and then the next day its not there, dont u think they will think of YOU!? and if they got a camera on their lot so when u go you'll probably spotted.......
Redline_civic91
06-08-2003, 05:59 AM
nah this place does not have camaras trust me. they probley forgot the car is even out there. btw i looked and it has its ls motor still in tach im thinking about taking that tranny out for the 5th gear im gonna still the lip first though:frown: cause its pretty simple and those mexicans dont even know english i doubt they can tell the little lip is missing and if it was they probley wont care. but after i get the lip im gonna hit them up and ask them for the tranny.
thnx 91civicdx for the reply and everyone else.
thnx 91civicdx for the reply and everyone else.
Melt
06-08-2003, 12:01 PM
ali has a point ... if you ask for the lip and then steal it they might be able to figure it out ... good luck anyways though
Rufes1
06-08-2003, 12:03 PM
Originally posted by Stali08
yea dont dude, just go to groupbuycenter.com and look for some cheap springs
I dont know how u managed to do such a stupid thing ahahha :sly:
yea dont dude, just go to groupbuycenter.com and look for some cheap springs
I dont know how u managed to do such a stupid thing ahahha :sly:
Redline_civic91
06-08-2003, 03:19 PM
im taking the lip tonight. hopefully everything goes good. and tomorrow im gonna ask for the tranny.
crxlvr
06-08-2003, 05:06 PM
good luck, wear all black and dont get arrested.
Melt
06-08-2003, 05:53 PM
Originally posted by crxlvr
good luck, wear all black and dont get arrested.
what he said :icon16:
good luck, wear all black and dont get arrested.
what he said :icon16:
Redline_civic91
06-08-2003, 07:19 PM
thanx guys theres not that much cops here but with my luck one will show up. its kinda isolated spot so hopefully im ok.
frozen_Joth
06-08-2003, 10:03 PM
Be like a ninja, a good THC level always helps the nerves! Just dont get caught and speak jiberish if you do! Good Luck.
Redline_civic91
06-08-2003, 10:47 PM
k one more question befor i head out hopefully someone responds soon. where are the bolts located and how much is there.
daddys
06-09-2003, 12:37 AM
if i remember correctly there are like 6 ,,7,,or maybe 8,,,they are all under the lip
Melt
06-09-2003, 12:38 AM
man hurry up and go steal that shit :devil:
GTA
06-09-2003, 03:55 AM
Originally posted by Redline_civic91
k one more question befor i head out hopefully someone responds soon. where are the bolts located and how much is there.
i know im late on this but theres about 10 if i rememeber correctly.
k one more question befor i head out hopefully someone responds soon. where are the bolts located and how much is there.
i know im late on this but theres about 10 if i rememeber correctly.
sastanley
06-09-2003, 12:12 PM
So did the dude say "no"??? - WTF man :wtf: I can't believe you people are condoning this shit. Just think about Walt and his missing bumper :angryfire
You should just buy the whole car off the dude for $250. They may look at it as you taking it off their hands.
Show a little respect in the 4g crowd and represent the right way.
Stealing is wrong!!! :thumbsdow :nono: :slap:
You should just buy the whole car off the dude for $250. They may look at it as you taking it off their hands.
Show a little respect in the 4g crowd and represent the right way.
Stealing is wrong!!! :thumbsdow :nono: :slap:
Melt
06-09-2003, 12:17 PM
a lip is a lot different than an entire aftermarket bumper.
slammed89civic
06-09-2003, 01:28 PM
Show a little respect in the 4g crowd and represent the right way
i agree 100%, and as melt said, it is no aftermarket bumper, but stealing is stealing, i know if you can afford a crvtec setup u can afford a lip, this is rediculious
i agree 100%, and as melt said, it is no aftermarket bumper, but stealing is stealing, i know if you can afford a crvtec setup u can afford a lip, this is rediculious
Melt
06-09-2003, 01:46 PM
its still just a lip ... if he doesnt steal it it will probably get crushed in the crusher anyways ... so I see it as a victimless crime.
Redline_civic91
06-09-2003, 06:15 PM
Originally posted by slammed89civic
i agree 100%, and as melt said, it is no aftermarket bumper, but stealing is stealing, i know if you can afford a crvtec setup u can afford a lip, this is rediculious
:mad: damn chill. its a freakin lip that is discolored on a fucked up car that they really dont care about. im not robbing a freaking whole car hear i guarantee they woudn't even notice its gone.BUT..............check this out i went in there today in the morning cause i thought i should just ask them if can take it......i explained it to him inside he had no idea what i was talking bout so we walked to the car and i showed him and he said "shit take it off and you can have it doesnt bother me" but in spanish. so i said go for it im gonna get it later on. but.....i went inside the junkyard and they have a teg there the tag says its a 89 but my mechanic said it may be a 90 manufactured in late 89's. but i have a question the motor is a b18a1 and the tranny is a cable 5 speed. on the tranny it is marked S1-1004????? is this a b16 tranny??? my tranny is an S1 too. did someone put a b16 tranny on that teg before??? or did some ls come S1. i asked my mechanic and he said he didn't know if it was b16 untill we put it on. but did ls' come with an S1. i asked the dude if he'd sell it he said yes $250 w/30 day warrantie so i said fuck yeah. im gonna try this out hopefully its a good b16 tranny even if its ls im keeping it.(if its good) but does anyone have an idea of what tranny is on here.
i agree 100%, and as melt said, it is no aftermarket bumper, but stealing is stealing, i know if you can afford a crvtec setup u can afford a lip, this is rediculious
:mad: damn chill. its a freakin lip that is discolored on a fucked up car that they really dont care about. im not robbing a freaking whole car hear i guarantee they woudn't even notice its gone.BUT..............check this out i went in there today in the morning cause i thought i should just ask them if can take it......i explained it to him inside he had no idea what i was talking bout so we walked to the car and i showed him and he said "shit take it off and you can have it doesnt bother me" but in spanish. so i said go for it im gonna get it later on. but.....i went inside the junkyard and they have a teg there the tag says its a 89 but my mechanic said it may be a 90 manufactured in late 89's. but i have a question the motor is a b18a1 and the tranny is a cable 5 speed. on the tranny it is marked S1-1004????? is this a b16 tranny??? my tranny is an S1 too. did someone put a b16 tranny on that teg before??? or did some ls come S1. i asked my mechanic and he said he didn't know if it was b16 untill we put it on. but did ls' come with an S1. i asked the dude if he'd sell it he said yes $250 w/30 day warrantie so i said fuck yeah. im gonna try this out hopefully its a good b16 tranny even if its ls im keeping it.(if its good) but does anyone have an idea of what tranny is on here.
91civicDXdude
06-10-2003, 02:42 AM
you can definately tell if its an 89 or a 90. they are totally different body styles. all 1st gens have d16a1.
Redline_civic91
06-10-2003, 02:54 AM
well the tag inside by where the door closes say 89. but it defenitly has a b18a1 motor with s1 tranny. thats why my mechanic said it might have been manufactured in the late 89's but its a90. but im curious to know what tranny that is in there. it says s1. im hoping its a b16 but i think its an usdm ls tranny.
91civicDXdude
06-10-2003, 03:10 AM
sastanley
06-10-2003, 10:34 AM
Well dude....glad you talked with him first...good on ya :thumbsup:
The sticker on the door jamb should tell you when the car was manufactured...my '91 was built in June 1991, so it was probably one of the last 91 models to come off the line, since they introduce the next year by Sept/Oct or so. So my guess is this is a 90 that was built in late 89 as your mechanic said. The 1st gen tegs have the flip up headlights and d-series motors...(as noted above) - if they have a b18 and composite headlights it is a 90-93.
I would buy that shit too...sounds like a good deal!!! :bigthumb:
The sticker on the door jamb should tell you when the car was manufactured...my '91 was built in June 1991, so it was probably one of the last 91 models to come off the line, since they introduce the next year by Sept/Oct or so. So my guess is this is a 90 that was built in late 89 as your mechanic said. The 1st gen tegs have the flip up headlights and d-series motors...(as noted above) - if they have a b18 and composite headlights it is a 90-93.
I would buy that shit too...sounds like a good deal!!! :bigthumb:
Redline_civic91
06-10-2003, 01:10 PM
Originally posted by 91civicDXdude
definately LS tranny.
http://ff-squad.com/Bgears.htm
i dont know how accurate that is. cause my tranny is a s1 but its a b16. that has y1 as the only b16 tranny if im correct. i dont think thats right. i do believe that integras tranny is ls though. quick question could i still use my same clutch setup with an ls tranny.
definately LS tranny.
http://ff-squad.com/Bgears.htm
i dont know how accurate that is. cause my tranny is a s1 but its a b16. that has y1 as the only b16 tranny if im correct. i dont think thats right. i do believe that integras tranny is ls though. quick question could i still use my same clutch setup with an ls tranny.
crxlvr
06-10-2003, 05:35 PM
Originally posted by sastanley
my '91 was built in June 1991, so it was probably one of the last 91 models to come off the line, since they introduce the next year by Sept/Oct or so.
my crx was made in DEC 91, i also thought that production stopped in late summer.
my '91 was built in June 1991, so it was probably one of the last 91 models to come off the line, since they introduce the next year by Sept/Oct or so.
my crx was made in DEC 91, i also thought that production stopped in late summer.
Automotive Network, Inc., Copyright ©2025
