low rpms and
derekmci
11-19-2010, 05:38 PM
Hello
i am havimg an issue with my 2000 ford windstar.
The van starts fine and soon after ideling i notice the rpms needle will start to drop....the van starts to sound as if it wants to stall out. just wondering if anyone could help out with this issue thanks
i am havimg an issue with my 2000 ford windstar.
The van starts fine and soon after ideling i notice the rpms needle will start to drop....the van starts to sound as if it wants to stall out. just wondering if anyone could help out with this issue thanks
olopezm
11-19-2010, 07:05 PM
Welcome to the forum!
The first things to check are the usuals:
Dirty IAC valve. Here's a link about how to clean it: http://leckemby.net/windstar/windstar02.html
Faulty/dirty MAF sensor.- to check this unplug the connector to the MAF sensor and see if the van runs better. Give it a clean with MAF cleaner.
Vacuum leaks.- Check all hoses around the intake for rotted/cracked rubber hoses.
Fuel pressure.- you'll need a fuel pressure tester connected to the fuel rail under the IAC valve Key On/Engine off should be 30-45PSI; Key On/Engine Running 28-45PSI.
Best regards,
Oscar.
The first things to check are the usuals:
Dirty IAC valve. Here's a link about how to clean it: http://leckemby.net/windstar/windstar02.html
Faulty/dirty MAF sensor.- to check this unplug the connector to the MAF sensor and see if the van runs better. Give it a clean with MAF cleaner.
Vacuum leaks.- Check all hoses around the intake for rotted/cracked rubber hoses.
Fuel pressure.- you'll need a fuel pressure tester connected to the fuel rail under the IAC valve Key On/Engine off should be 30-45PSI; Key On/Engine Running 28-45PSI.
Best regards,
Oscar.
Automotive Network, Inc., Copyright ©2026