98 1.9 dohc engine pics needed please

Folks, I am reinstalling the engine after 6 months of being laid up. I have 3 areas where I can't remember proper mounting of parts.
One is where the 2 rubber fuel hoses connect to the engine. I can see how the main line connects but it's the return hose? and associated mounting bracket (about 2" by 3") I can't figure out.
The second area is the three bolt mounting bracket from the bottom of the engine under the alternator. 2 of the 3 bolts are fine but the 3rd bottoms out about 1/2" short of being tight. I also have a mounting support bracket about 7" long I think may connect there and up to the intake but not sure.
Last is the starter wiring connections. Several loop end wires hanging that I'm not 100% how to hook up.
If you have any pics of these areas please post a reply. I would appreciate it and you would be a hero to my son who wants his car back up and running. After 6 months who would have thought a 17 year old could get so impatient? There are no usefull pics in the Haynes/chilton manual so we are at your mercy.
Thank you, Charlieg