Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-29-2004, 09:40 PM | #1 | |
AF Newbie
|
how to: install intake
93 sentra se-r ,some one please help me install my intake, i dont know what to do.... i took out the crappy filter and the bottom part, but theres this one plug attached to the original filter... i dont know what to do with it....
help me please
__________________
- 93 sr20de sentra se-r |
|
03-30-2004, 07:16 PM | #2 | |
AF Enthusiast
|
Re: how to: install intake
well i dont own a SE-R, but i think it will be easier to tell us if it is a low port or high port? and what exacly are you talkin about? where is it located?
|
|
03-31-2004, 02:58 AM | #3 | |
AF Enthusiast
|
Ok, look at your intake tube coming from the original filter box. On the tube shoud be a metal piece with a cord plugged into it. This is your MAF. You're gonna remove everything from that MAF to the stock filter box. In your new intake, you should have a piece that bolts onto the MAF and then connects to your new filter. Hope that helps. Can't give any more details cause I don't know exactly what you're installing.
__________________
SR20 powered SE-R: 60mph-6.2 sec., 1/4mi.-14.7 sec. VG30 powered Maxima SE: 60mph-7.8, 1/4mi.-15.8 sec. Don't make me ANGRY Or I will kick you in teh NUTS Your NUTS will feel teh steel toe Teh steel toe that has been in teh snow I will rip off yuor pants and kick yuo in teh nuts My steel toe will stick to yuor nuts And I will swing yuo around by yuor nuts as I do a Hurricane kick |
|
|
POST REPLY TO THIS THREAD |
|
|