Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-23-2010, 02:01 PM | #1 | |
AF Newbie
Join Date: Jan 2010
Location: Buckeye, Arizona
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
1986 chevy suburban has no powery
Hey everyone, I have a 1986 chevy suburban 350ci 4x4.. Ok the other day it just started running like shit, it has no power, i looked at the plug wires and 2 of them were bad so i changed them, didnt work, i changed the map sensor didnt work, sprayed carb cleaner in the carb and nothing checked the cap and rotor they were bad so i replaced them.. still running the same.. But the truck does have power when in idol, hit the gas and it screams.. all good, but as soon as i put it in drive and go to take off it has no power.. when i do pick up some speed i can floor it and it will go into over drive and have power.. Does anyone know what it could be? Also i redid the back brakes and there not too tight
Re tracking my steps.. I did the back brakes, took it to the car wash and degreesed the motor and under carrage then the next day the problem started.. I just got the truck 2 weeks ago |
|
02-01-2010, 01:32 PM | #2 | |
AF Enthusiast
|
Re: 1986 chevy suburban has no powery
Pop off the distributor cap, I bet you got water into it. Dry it out and you should be good to go. You may have gotten other things wet as well.
Bob |
|
02-01-2010, 11:09 PM | #3 | |
AF Regular
Join Date: Feb 2004
Location: clute, Texas
Posts: 128
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1986 chevy suburban has no powery
Check for vacum leaks ,intake or hoses
|
|
|
POST REPLY TO THIS THREAD |
|
|