Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
02-20-2004, 09:25 AM | #1 | |
AF Regular
|
Fog Light Help!
My passenger side fog light went out. I was trying to take it off last night and stipped the hell out of what I can see is the only thing holding it on. Now I dont know what to do. Any suggestions?
|
|
02-20-2004, 09:51 AM | #2 | |
AF Regular
|
Re: Fog Light Help!
What part did you strip?
|
|
02-20-2004, 05:26 PM | #3 | |
AF Enthusiast
|
Re: Fog Light Help!
There is only one 10mm bolt that holds the foglight on. Take that out and pull the light towards the center of the car.
|
|
02-23-2004, 11:04 AM | #4 | |
AF Regular
Thread starter
|
Mine has a Philips screw where I'm guessing the 10mm bolt should be as soon as I turned the screwdriver it stipped the screw. I didnt see the bolt anywhere I'll keep looking though. If your looking at the fog light to the right of it set behind it is the location of screw.
|
|
02-25-2004, 08:58 AM | #5 | |
AF Enthusiast
|
Re: Fog Light Help!
What year is your car?
|
|
02-25-2004, 01:20 PM | #6 | |
AF Newbie
|
on mine the nut that the srew goes into came loose from where the nut is held on. I was able to reach a 10mm wrench around onto the nut and hold it steady, then i could unsrew the srew. once u loosen it up enough to where you can use your hand do it by hand so as not to loose the nut
|
|
02-25-2004, 10:57 PM | #7 | |
AF Regular
Thread starter
|
Re: Fog Light Help!
Its an '01, I'm guessing that when I wrecked it they just put the screws in instead of the bolt. I just drilled it out and replaced it with a 10mm bolt. I changed both of them for unifomity sake. Thanks Guys. The driver side came right out with no problem. Thats just my luck.
|
|
|
POST REPLY TO THIS THREAD |
|
|