Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
'88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-07-2011, 11:45 PM | #1 | |
AF Newbie
Join Date: Mar 2011
Location: Kennewick, Washington
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
|
How to remove Throttle Positioning Sensor???
I have an 88 Honda Civic 1.5L I need to replace the Throttle Positioning sensor on it. But it has some safety nut holding it on normally it’s a Phillips screw I can’t figure any way to remove this? Any help would be great. Thanks
|
|
03-08-2011, 06:06 AM | #2 | |
TLD Member #1
|
Re: How to remove Throttle Positioning Sensor???
You have the stock bolts still in it. Take a chisel and a hammer and start hammering in the direction to take the bolt out....or take a dremel tool and cut a slot in the bolt and use a flat head to remove.
__________________
Tony 91 Civic Sedan DX - Stock 287k Miles |
|
|
POST REPLY TO THIS THREAD |
|
|