Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-28-2010, 12:12 AM | #1 | |
AF Newbie
Join Date: Jul 2010
Location: Fort Collins, Colorado
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
How to remove 2000 Amigo hard top?
I'm trying to figure out if it's possible/easy to remove the hard top from a friend's 2000 Amigo. I found the bolts that obviously need to be removed from the interior side of the top, but am wondering what else is connected. Any advice and instruction would be appreciated!
|
|
01-25-2011, 05:45 PM | #2 | ||
AF Newbie
Join Date: May 2006
Location: Boca Raton, Florida
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: How to remove 2000 Amigo hard top?
Quote:
There's a total of 10 bolts holding it down. Pull all the cladding off on the inside back half to make life easier. On each side - 2 up front on the metal flat bars to the roof, 1 midway of the window next to the roll bar, and 2 on the corners on the outside behind the removable corner piece. On the left side, inside behind the panel should be a 4 wire connector for the brake light, on the right side is a small hose hook up for the washer. |
||
|
POST REPLY TO THIS THREAD |
|
|