Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-17-2010, 05:06 PM | #31 | |
AF Newbie
Thread starter
Join Date: Feb 2010
Location: myrtle beach, South Carolina
Posts: 74
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 3kgt please help
I have a 95 3000gt 6g72 non turbo dohc i had the motor replaced three weeks ago water pump,timing belt ,plugs,wires,ecu temp gauge ,coils,top vacuum lines excluding purge container lines, plenum gasket,stepper motor.also took to a shop for a standard diagnostic and they could not find any flaw in the running condition.but i have a slightly rough idle with no lights also when start it when cold it goes to 2500rpms for about 2 minutes before coming down to around 1000rp-800 rpms its a steady idle speed with a sputter .also if driven while cold it act's like it doesn't want to really go almost like it wants to stall or something without doing so!but when hot drive fine little power loss if any just the funny idle!please help!!thax in advance
|
|
03-18-2010, 11:41 PM | #32 | ||
AF Newbie
Join Date: Sep 2006
Location: hagerstown, Maryland
Posts: 82
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: 95 3kgt please help
Quote:
__________________
Auto Velocity www.autovelocity.net autovelocity@myactv.net www.myspace.com/autovelocity |
||
03-18-2010, 11:49 PM | #33 | |
AF Newbie
Thread starter
Join Date: Feb 2010
Location: myrtle beach, South Carolina
Posts: 74
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 95 3kgt please help
i pulled the cam cover off lined up the marks and the lowwer pully is on 10 is that correct?
|
|
03-19-2010, 12:36 AM | #34 | |
AF Newbie
Thread starter
Join Date: Feb 2010
Location: myrtle beach, South Carolina
Posts: 74
Thanks: 0
Thanked 0 Times in 0 Posts
|
is the mark on harmonic balancer suposed to be t??95 3000gt
1995 3000gt i pulled of the cam cover and put my car in reverse and lined up the marks and the harmonic balancer was at 10 is this correct timming?
|
|
03-19-2010, 05:07 AM | #35 | |
Your worst nightmare
Join Date: Oct 2004
Location: Smithfield, Pennsylvania
Posts: 6,060
Thanks: 40
Thanked 252 Times in 246 Posts
|
Re: is the mark on harmonic balancer suposed to be t??95 3000gt
That 10 is for ignition timing. That has nothing to do with cam timing.
Again, please stop making multiple threads. Keep all the info in the one merged thread.
__________________
|
|
02-04-2016, 07:13 PM | #36 | |
AF Newbie
Join Date: Jul 2015
Location: bradford, Arkansas
Posts: 29
Thanks: 3
Thanked 0 Times in 0 Posts
|
Re: eating gas rough idle missing when cold
Mine started idle reving when im stopped it will rev 1-3rpm continusly by itself.any ideas as to a cause
|
|
02-09-2016, 10:44 PM | #37 | |
AF Newbie
Join Date: Jul 2015
Location: bradford, Arkansas
Posts: 29
Thanks: 3
Thanked 0 Times in 0 Posts
|
Re: eating gas rough idle missing when cold
bought a can of mass flow cleaner got home and reading the back of the can it says don't use it on Karman Vortex mass air flow sensors. the examples listed include mitisubushi. So does my car have the Karman Vortex mass air flow sensor? how do I tell?
|
|
02-10-2016, 05:05 AM | #38 | |
Your worst nightmare
Join Date: Oct 2004
Location: Smithfield, Pennsylvania
Posts: 6,060
Thanks: 40
Thanked 252 Times in 246 Posts
|
Re: eating gas rough idle missing when cold
Yes the 3000GT uses a Karman MAS
__________________
|
|
|
POST REPLY TO THIS THREAD |
Tags |
3000gt , idle , intake , leak , vaccum |
|
|