Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
01-30-2009, 07:50 PM | #1 | |
AF Newbie
Join Date: Jun 2008
Location: Simpsonville, South Carolina
Posts: 88
Thanks: 0
Thanked 0 Times in 0 Posts
|
sr20 for 240
can the sr20 bolt right up to the stock transmission if you do an engine swap?? or is it a different setup?
|
|
02-01-2009, 01:10 PM | #2 | |
AF Enthusiast
Join Date: Jan 2005
Location: Minneapolis, Minnesota
Posts: 3,277
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: sr20 for 240
you need the SR transmission. see my other post for the reason you should wait to swap motors, but when you do, just look for a complete swap. it comes with the motor, trans, ecu, wiring harness. the stock motor mounts, drive shaft, and exhaust all bolt up. you just need a downpipe for the SR to connect the turbo to the exhaust, as most swaps wont come with one.
__________________
|
|
02-13-2009, 05:10 PM | #3 | |
AF Newbie
Thread starter
Join Date: Jun 2008
Location: Simpsonville, South Carolina
Posts: 88
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: sr20 for 240
and how much overall am i looking at in cost for a complete sr20 swap?
|
|
02-14-2009, 03:23 AM | #4 | |
AF Enthusiast
Join Date: Jan 2005
Location: Minneapolis, Minnesota
Posts: 3,277
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: sr20 for 240
if you do the whole install yourself, about 3k, give or take whatever you can get for cheap.
__________________
|
|
|
POST REPLY TO THIS THREAD |
|
|