 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
05-02-2003, 11:59 AM
|
#1 | |
|
AF Newbie
Join Date: May 2003
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Keyless entry
I would like to know if anyone could help me with information on programming a keyless entry fob (FCC ID: GQ43VT14T) for a 2003 Toyota Matrix?
Thanks, Jeff |
|
|
|
|
10-22-2003, 02:36 PM
|
#2 | |
|
AF Newbie
Join Date: Oct 2003
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Keyless Entry Programming Instructions
Here, I've posted this site on another thread but it's a great site for information on programming you're Keyless Entry or your VIP RS3200 Security systems. They have instructions for both.
 Toyota Keyless Entry Programming Instructions. Good luck! |
|
|
|
|
|
02-10-2004, 07:20 AM
|
#3 | ||
|
AF Newbie
Join Date: Feb 2004
Location: Frankfort, Kentucky
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Keyless Entry Programming Instructions
Quote:
|
||
|
|
|
|
09-01-2004, 01:12 AM
|
#4 | |
|
Banned
Join Date: Dec 2002
Posts: 103
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Keyless entry
|
|
|
|
|
|
09-15-2004, 09:20 PM
|
#5 | |
|
AF Newbie
Join Date: Sep 2004
Location: New hartford, Connecticut
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Where can I buy the factory/oem security system for a 2004 Corolla, I think I've seen one on ebay in the past but didnt know if it came with installation instructions.
|
|
|
|
|
|
01-15-2005, 05:07 PM
|
#6 | |
|
AF Newbie
Join Date: Dec 2004
Location: Isabela
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Toyota Corolla keyless programing 1998 - 2001 remote
check this procedure, it works for me on a 1998 1999 2000 2001 toyota corolla keyless remote programing , is easy and fast. If you have a second remote just push the same button until light and horn chirps again.
FCC ID: BAB237131-022 CANADA: 2024 101 526 http://www.4runners.org/articles/rs3000/ RS3000 programing is not the same as RS3200 Last edited by 25259250; 01-16-2005 at 08:05 AM. |
|
|
|
|
|
02-14-2005, 12:03 AM
|
#7 | |
|
Authorized Vendor
 
Join Date: Sep 2003
Location: Keyless Entry Remotes
Posts: 741
Thanks: 0
Thanked 8 Times in 8 Posts
|
Re: Keyless entry
This is the correct procedure for the Matrix/Vibe:
1. Driver door open and unlocked. Key out of the ignition 2. Insert the key and remove 2 times in 5 sec. 3. Close and open driver door 2 times in 40 sec. 4. Insert the key and remove it again from ignition. 5. Close and open driver door 2 times in 40 sec. 6. Insert the key in ignition, 7. Close the door, 8. Turn to on and back to lock in 1 second intervals. 1 time for add, 2 times for rewrite, 3 for confirmation 5 for prohibition. (yes, there is no “4”) 9. Remove the key 10. Power lock will cycle to confirm 11. For add or rewrite mode within 40 sec of the confirmation, A. press “lock” and “unlock” buttons of the FOB at the same time between 1 and 1.5 seconds. B. within 3 sec press “Lock” button for more than 1 sec and release. C. If it’s correct, the power door lock will cycle once. If it’s wrong the door lock will cycle twice.
__________________
Replacement keyless entry remotes available here - up to 90% off - All makes/models from Acura-Volvo, 1988-present - http://www.OriginalKeyless.com |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
