Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
12-13-2004, 10:47 PM | #1 | |
AF Newbie
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
91 teg engine swapping
i have a 1991 integra and i want to do an engine swap on it. I was thinking a B18C1.
Does it fit or can it fit? |
|
12-13-2004, 11:10 PM | #2 | |
AF Enthusiast
|
Re: 91 teg engine swapping
Yes it will fit, you will need all of the following:
GSR ECU GSR motor B18C1 wiring harness's mounts and a manual on your car will help a great deal. I would suggest www.helminc.com for the manual.
__________________
|
|
12-13-2004, 11:20 PM | #3 | |
AF Newbie
Thread starter
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
what if my car is automatic and i want to convert it into manual
|
|
12-13-2004, 11:23 PM | #4 | |
AF Enthusiast
|
Re: 91 teg engine swapping
look in the FAQ at the top of the page, post #20 which is the 5th post down on the 2nd page.
__________________
|
|
12-13-2004, 11:36 PM | #5 | |
AF Newbie
Thread starter
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
i went to the FAQ but some stuff about vbulletin came out
|
|
12-13-2004, 11:52 PM | #6 | |
AF Newbie
Thread starter
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
what tranny do i use for the b18c1 engine
|
|
12-14-2004, 12:31 AM | #7 | |
Banned
|
Re: 91 teg engine swapping
there is another post almost exactly like this one that is pretty current. I believe whtteg made the point of making sure the tranny you pick is a cable tranny not hydraulic. If you are feeling lucky, look for like a 93 GSR or XSi tranny. You'll be shifting a lot but ur shit will be fast.
|
|
12-15-2004, 09:10 PM | #8 | |
AF Newbie
Thread starter
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
if i put b18c1 from a 94 teg can i still put the 93 gsr tranny
|
|
12-15-2004, 09:12 PM | #9 | ||
AF Enthusiast
|
Re: Re: 91 teg engine swapping
Quote:
__________________
|
||
12-15-2004, 09:14 PM | #10 | |
AF Newbie
Thread starter
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
do u think that doing the 5 speed conversion is hard
|
|
12-15-2004, 09:18 PM | #11 | ||
AF Enthusiast
|
Re: Re: 91 teg engine swapping
Quote:
__________________
|
||
12-15-2004, 09:19 PM | #12 | |
AF Newbie
Thread starter
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
since im going to do the swap, my car comes with a b18a1 stock, do u think the b18c1 will just be a direct drop in, or do i still have to get different motor mounts???
|
|
12-16-2004, 07:37 PM | #13 | |
AF Newbie
Thread starter
Join Date: Dec 2004
Location: san antonio, Texas
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
ok so i got some info now together tell me if it sounds good? I buy a b18c1 v-tech engine and i buy either a b16 tranny or a 93 gsr tranny. What do you think?And will the b18c1 do a direct fit in my engine bay or do i need mounts?
|
|
12-17-2004, 11:55 PM | #14 | |
AF Newbie
Join Date: Dec 2004
Location: Moreno Valley, California
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 91 teg engine swapping
is it possible to put a RB25DET engine in a 95 teg?
|
|
12-18-2004, 07:41 AM | #15 | ||
AF Enthusiast
|
Re: Re: 91 teg engine swapping
Quote:
__________________
|
||
|
POST REPLY TO THIS THREAD |
|
|