Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
06-29-2015, 09:32 PM | #1 | |
AF Newbie
Join Date: Jun 2015
Location: payne, Ohio
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
|
starting issue
i have a 1974 cutlass supreme I just put a new ignition lock in and a starter solenoid and every time I go to turn over the car I have to play with the key to get it to start not sure what this might be causing this problem would love some help....this problem was there b4 I replaced the ignition lock cylinder and starter solenoid
|
|
06-29-2015, 09:49 PM | #2 | |
AF Moderator
Join Date: Oct 2004
Location: Bellingham, Washington
Posts: 1,751
Thanks: 0
Thanked 73 Times in 73 Posts
|
Re: starting issue
its probably the switch itself then, should be on top of the the steering column under the dash. could also be your neutral safety/ clutch pedal switch depending on tranny
|
|
The Following User Says Thank You to Crvett69 For This Useful Post: |
mosier (06-30-2015)
|
06-30-2015, 02:37 PM | #3 | |
AF Newbie
Thread starter
Join Date: Jun 2015
Location: payne, Ohio
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: starting issue
thanks and will I need to pull the whole steering out? to get to it im not sure if its a lose connection or not making contact. when I turn the key all the way to start it I have to let off it just a small amount an turn back full way for it to start to turn over I've been stumped on this for quite some time now.
|
|
06-30-2015, 06:28 PM | #4 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,958
Thanks: 25
Thanked 371 Times in 365 Posts
|
Re: starting issue
The switch at the bottom of the column is out of adjustment.
__________________
|
|
07-01-2015, 05:20 PM | #5 | |
AF Newbie
Thread starter
Join Date: Jun 2015
Location: payne, Ohio
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: starting issue
today I went out to start it after its just been siting in the sun and when I go to turn over the ignition is very squeaky like its rubbing on something on the inside and will not start or turn over I have power but that's it any ideas on that or am I going to have to replace the whole steering column????????????????
|
|
|
POST REPLY TO THIS THREAD |
|
|