Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-11-2008, 09:46 AM | #1 | |
AF Newbie
Join Date: Aug 2008
Location: El Dorado, Kansas
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
programming new remotes
If you change your battery in your remote for this vehicle, do you have to reprogram?
Also if you buy a new remote does anyone know how to reprogram without going to the dealer? |
|
08-13-2008, 03:18 PM | #2 | |
AF Enthusiast
Join Date: Mar 2008
Location: Cincinnati, Ohio
Posts: 845
Thanks: 0
Thanked 3 Times in 3 Posts
|
Re: programming new remotes
Try This:
Step 1: Open drivers door and leave open. Step 2: Lock and unlock the drivers door using the power door lock switch on the door. Step 3: Insert key into the ignition. Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition. Step 5: Open and close the drivers door 3 times. (Door should be left open after this step). Step 6: ECU should respond by locking and unlocking the doors. Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors. Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors. Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done! |
|
|
POST REPLY TO THIS THREAD |
|
|