amp

Corey170 · 12-09-2006, 01:26 AM

I just bought 2 10" alpine type R subwoofers, in a rox box H.O. ported box, and i was wondering what kind of amp i would need to power them to their full potential. I'm not worrying about getting an amp to power my midranges quite yet, but that will come later. any help please?

PlayStation3 · 12-11-2006, 06:27 AM

which version did you get dvc 2 ohm or 4 ohm

Corey170 · 12-11-2006, 02:01 PM

I dont know; i bought them off a friend so they didnt come in their original packaging or with any identification. they are already installed in the box too so i can't tell.

l_eclipse_l · 12-11-2006, 04:04 PM

It would be helpful to know how much power those subs can handle. Find that out, and we point you in the right direction as far as an amp goes.

Corey170 · 12-11-2006, 05:54 PM

ok thats fine. but how would i find this out? i dont really feel like taking the speaker/box apart.

pimprolla112 · 12-11-2006, 09:44 PM

Sorry to say thats the only way to find out unless your friend knows off the top of his head. Its only 8 screws to pull the sub out, and it would point everyone in the right direction. Both susb handle the same amount of power it just depends on whehter you need a 1-ohm stable amp or a 2-ohm, besides your going to have to pull it apart to get to the wiring.

Corey170 · 12-14-2006, 08:21 PM

Well I talked to a friend of mine who works in car audio and he said that all alpine type R 10 inches are 4 ohm. I was thinking about getting a massive RS 25 amp. This comes with 2 channels, and has an output power of 65 W/Ch (14.5 volts, 4 ohms). maximum power is 300 W and the total harmonic distortion is 0.012 (THD). Is this a good amp to buy or not?

BURAK · 12-14-2006, 09:00 PM

Quote:

Originally Posted by Corey170

Well I talked to a friend of mine who works in car audio and he said that all alpine type R 10 inches are 4 ohm. I was thinking about getting a massive RS 25 amp. This comes with 2 channels, and has an output power of 65 W/Ch (14.5 volts, 4 ohms). maximum power is 300 W and the total harmonic distortion is 0.012 (THD). Is this a good amp to buy or not?

No he's wrong,all typeR 10"s are not 4 ohm,typeR has 2 models;1042d and 1022d..1042d is 4+4ohm and you can run this sub 2 or 8 ohm but RS 25 is not enough both of 2,typeR subs 500w rms power,also you need more powerful amps..

PlayStation3 · 12-14-2006, 09:01 PM

Quote:

Originally Posted by Corey170

Well I talked to a friend of mine who works in car audio and he said that all alpine type R 10 inches are 4 ohm. I was thinking about getting a massive RS 25 amp. This comes with 2 channels, and has an output power of 65 W/Ch (14.5 volts, 4 ohms). maximum power is 300 W and the total harmonic distortion is 0.012 (THD). Is this a good amp to buy or not?

wrong only the type x subs come as 4 ohm. type r are come in 2 ohm and 4 ohm. and now your subs rms is 500 watts rms try to match that. but with out the ohm knowing it would be hard to find one.

pimprolla112 · 12-14-2006, 10:38 PM

Pull the sub out of the box, it has a rubber boot cover for the magnet it says right on there whether its 2 or 4 ohm. Also depending on the model/series/year also depends on power rating, the newer ones with sorround with the 2 bumps is 500 and the one with the single bump isd i believe 350-400.

http://cgi.ebay.com/ALPINE-SWR-1022D...QQcmdZViewItem

new

I cant find a pic of the old one but they have the standard single bump sorround.

PlayStation3 · 12-15-2006, 06:35 AM

isn't there a way to rig up a ohm meter?

POST REPLY TO THIS THREAD