Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-13-2005, 04:17 PM | #1 | |
AF Newbie
Join Date: Nov 2004
Location: roanoke rapids, North Carolina
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Multifunction Switch
I thought I had a problem with the switch, but I took the cover off and have found that three different wires have broken. A pink, a green and a beige wire. One goes to the cruise, the others (i assume go to the low beam because they are not working.) Does anybody have any wiring information on these wires? I have bought new connectors to use, but am not sure which wires goes into which slot. Thanks for any assistance!
|
|
02-09-2005, 11:41 AM | #2 | |
AF Newbie
Join Date: Aug 2004
Location: minnetonka, Minnesota
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi Bman. I have the same problem with my 95. Is it hard to get at the wires? Do you have to remove the steering wheel and other difficult parts? An airbag wire is also broken in there because the airbag light would go on and off if the steering wheel was lowered or raised. The cruise and high beams have stopped working also, so I'm pretty sure the wires are broken.
|
|
02-09-2005, 12:55 PM | #3 | |
AF Newbie
Thread starter
Join Date: Nov 2004
Location: roanoke rapids, North Carolina
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Multifunction Switch
I had to bite the bullet and let the shop do it. The part included the needed wires and cost me 250.00. Shop charged me additional 70 to put it on, but now it works fine.
|
|
|
POST REPLY TO THIS THREAD |
|
|