 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Engineering/Technical Ask technical questions about cars. Do you know how a car engine works? |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
10-12-2023, 12:58 AM
|
#1 | |
|
AF Newbie
Join Date: Oct 2023
Location: Chicago, Illinois
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Scion XA Alternator Bracket Engine Block Mount Bolt Broke Off
Basically, the alternator bracket bolt that is connected to the engine block broke in half. The screw broke in half, one half is inside the engine. Is there anything I can do?
 |
|
|
|
|
10-13-2023, 11:09 AM
|
#2 | |
|
SHO No Mo
 
Join Date: Jun 2004
Location: Cedar Rapids, Iowa
Posts: 10,951
Thanks: 100
Thanked 350 Times in 344 Posts
|
Re: Scion XA Alternator Bracket Engine Block Mount Bolt Broke Off
Welcome to the forum!
Did you manage to get the alternator and the bracket out of the way? If so, and you have access to someone with a MIG welder, you could weld a nut onto the part of the bolt remaining in the block. The heat from welding would help break any corrosion or thread locking compound on the threads, and the nut gives you something to connect a wrench to. Another option would be to carefully drill a hole down the center of the broken bolt, preferably using left-hand drill bits. If the drill bit doesn't manage to spin the broken piece out, you can then use a bolt extractor in the drilled hole to spin the broken piece out. Be sure to follow the extractor directions though. If you manage to break an extractor off, there's very little chance of being able to drill that out. -Rod |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
| Tags |
| alternator , bolt , bracket , broke , scion |
 |
|
|
