Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-26-2013, 10:07 PM | #1 | |
AF Newbie
Join Date: May 2013
Location: New York
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Balance Shaft Belts
Can a Honda Accord 2.2 liter engine work without balance shaft belt?
Also, at what RPMs do the vibration on the crank shaft start? UPDATE: Sorry it should have said "without" instead of "with" Last edited by newyorkcar400; 05-28-2013 at 01:41 PM. |
|
05-27-2013, 03:34 PM | #2 | ||
AF Enthusiast
Join Date: Dec 2005
Location: Oceanside, Alaska
Posts: 1,596
Thanks: 6
Thanked 26 Times in 26 Posts
|
Re: Balance Shaft Belts
I cannot understand your question.
I believe that 2.2 engine does have a balance shaft belt. I once made a mistake and installed a balance shaft belt 180 degrees off. It idled fairly well but when driving, (at about 2000 rpm) the car was making a very bad sound. I hope that answers your question, Regards, Sam
__________________
Quote:
|
||
09-05-2013, 12:54 PM | #3 | |
AF Newbie
Join Date: Jun 2008
Location: Cedar Rapids, Iowa
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Balance Shaft Belts
Since the balance belt also drives the oil pump, it's probably not advisable
|
|
09-13-2013, 11:06 PM | #4 | |
AF Newbie
Join Date: Sep 2013
Location: Vietnam
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Balance Shaft Belts
Honda Accord 2.2. used two shaft to balance engine. If i am not wrong here, it is balance follow the princicle of the Lanchester
Method install is: shaft 1 have mark on pulley and block engine shaft 2 have not mark but we do as follows: -Remove bolt used hexagon 12 next to shaft (bolt is putted perpendicular with balance shaft) -measure distance in the hole with bock Distance about 8mm, that is ok Install balance belt It is sure to noise will out |
|
|
POST REPLY TO THIS THREAD |
Tags |
belt , shaft |
|
|