 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
02-11-2002, 05:42 PM
|
#1 | |
|
AF Enthusiast
 
Join Date: Dec 2001
Location: Vancouver, Washington
Posts: 2,254
Thanks: 0
Thanked 1 Time in 1 Post
|
Need help with Brake lights....
The brake lights on my sweet 1982 Delorean are out! I made sure the bulbs were still good, and I replaced the fuse, but they still don't work. The blinkers and back up lights still work, but I can't figure out why the brake lights won't come on. Any help is appreciated.
__________________
10 PRINT "MARC-OS 0WNZ J00!!!" 20 GOTO 10 RUN 4/8/04 - My CRX is officially dead, RIP Lucy 
|
|
|
|
|
02-11-2002, 06:58 PM
|
#2 | |
|
AF Enthusiast
Join Date: Dec 2001
Location: Houston, Texas
Posts: 1,130
Thanks: 0
Thanked 0 Times in 0 Posts
|
Maybe the wire connection is out?
|
|
|
|
|
|
02-15-2002, 11:32 AM
|
#3 | |
|
DeLorean Guy
 
Join Date: Feb 2002
Location: Hazard, Kentucky
Posts: 1,899
Thanks: 0
Thanked 0 Times in 0 Posts
|
two culprits
See if you get voltage to the wire where the PC board connects to the wiring harness (wedge something against the brake pedal if you are doing this solo). If you get power at the harness but no to the bulbs, the PC board may need repair or replacement.
If you do not get voltage to the wiring harness, then take a look at the switch that is on the brake pedal assembly. This little switch gets used every time you push on the brakes... so after 20 years its probably all used up. Replace it, and clean the contacts while you're down there.
__________________
SOLID! crew (circa 2002). DeLorean moderator. |
|
|
|
|
|
07-17-2003, 09:36 PM
|
#4 | |
|
AF Newbie
Join Date: Jul 2003
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
The connection between the socket and the board gets corroded . PJ Grady has new boards.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
