Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-24-2006, 05:51 AM | #1 | |
AF Newbie
Join Date: Sep 2006
Location: Manteca, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
1996 Yukon sensor problem ?!?
I have a 1996 Yukon 4X4 with the 5.7L engine. Is there a sensor or something that can go out, that will keep it from going into gear ?
When I start it, it starts fine. No matter what I shift into I get nothing. Nothing !?! Usually, even when the transmission is shot.... when you take it out of Park, you can here a pause, or slight change in the idle. Not mine, it sounds like I never moved it out of park. I think I've read almost every page under GMC, & Chevy but I haven't found anyone with this problem. Please help, Tim |
|
09-24-2006, 09:24 AM | #2 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,954
Thanks: 25
Thanked 371 Times in 365 Posts
|
Re: 1996 Yukon sensor problem ?!?
Welcome to AF. Checked the fluid level I assume. Is it actually holding or locked in park, could be a linkage discount but somewhat unlikely.
__________________
|
|
09-28-2006, 12:43 AM | #3 | |
AF Newbie
Thread starter
Join Date: Sep 2006
Location: Manteca, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1996 Yukon sensor problem ?!?
I'm sorry, I didn't read your reply correctly. But now I have, & yes ATF is fine, and I can shift anywhere I want to. When I shift out of Park there isn't even a slight change in the idle(Or motion.)
I don't know if this has anything to do with the problem or not, but about 5 days before this problem occured.....I had a problem with my exhaust. The spot where the exhaust comes into the muffler broke. I used some balewire to hold it in place until payday. Well, while on the way home from work on payday is when it quit. I was on the freeway, it didn't make any kind of noise. The stereo was off, the window was down. The only thing I noticed was I heard the RPMs raise slightly, and I eventually rolled to a stop. |
|
|
POST REPLY TO THIS THREAD |
|
|