Torque Wrench,How much torque for head studs

[jayballa305]

I just got my d15 head back from the machine shop,,i port and polished my head,,,and i need to torque the head studs back on and i wanted to know how much to lbs to torque the bolts,and witch holes do the small studs go into.Please if any websites that has specs or anything reply asap.....I got to get back to work.lol

[civicHBsi91]

i believe its 49ft/lbs and you have to tighten the in a sequence of

8-----6-----2-----4-----10

9-----3-----1-----5-----7

thats the sequence you tighten them in follow it 1,2,3 and so on...

if you dont get the illustration as you put the head on the block and you look at it from the front there are holes where the numbers are

your next mod should be a manual for your car

[drink\fight]

civic you sound like a troll to me!
the real torque spec is 22 in pds don't listen to that shitheel.

[civicHBsi91]

Originally Posted by drink\fight

civic you sound like a troll to me!
the real torque spec is 22 in pds don't listen to that shitheel.

yup im a troll


i did it off the top of my head i havent done it in months, i may have gotten the specs mixed up with the 84-87 motors, simple mistake, good correction ill give you that

[91civichatch2571]

Maybe i missed some sarcasm or something, but it is really 49 ft/lb

[civicHBsi91]

22 49......one is for 84-87 and one is for 88-91 i dont remember off the top of my head and i dont remember where my book is

[91civichatch2571]

im positive, got my handy dandy manual right here. 49ft/lb

[ci5ic]

Originally Posted by drink\fight

civic you sound like a troll to me!
the real torque spec is 22 in pds don't listen to that shitheel.

what a tard.

[civicHBsi91]

i thought i had it right, he said something about 22....what else is 22ft/lbs.......fuk this is going to bother me all night

[spongerlbc]

The first time you torque them down they are 22 ft/lbs, the second time around its 47 ft/lbs.