Tsuchiya's Hachiroku

[Vladamor]

Hi there.

I'm planning another project, and I can't dicide. One is the Tsuchiya's Hachiroku, but I have barely 2 pics. of the car. I want to ask you for some more of them, and maybe someone know what front bumper the car have.

Thanks a lot and REGARDS

[evil_hanzel]

front bumper is the standard kouki ae86 bumper with zenki front chin, clear turn signals.
TRD rear spoiler is attached to rear hatch then redone in FRP for that one piece look.
rear bumper is kouki bumper
rear tailights is kouki tails, aka redline tailights.


other specs
Sitsuwa Model Dry Carbon Fiber tank lid, mirror shell.
TRD FRP Hatch-lid with integrated TRD Spoiler (N2)
TRD Carbon Hood
TRD Reclining Bucket Seats
Fully reupholstered TRD interior fabric
MZ20 Rotor/Caliper on TRD custom brackets, Earl's Lines
TRD Short Stroke dampers
9kg/mm F, 8kg/mm R Springs
TRD 2 Way LSD
TRUST/EARL's 13 Row Oil Cooler
4.778 TRD Final with 1-3 Close Ratio Box
Gauges from Trust and Integral Metering
TRD Full bearing upper mount, tension rod, lower arm, lateral and 4 links (one-off custom TRD in house)
Modex SSR Dori-Dori Mesh 15x7 +2 offset / 10-15mm spacer
Image/Kei-Office C-2 original brake pads
Yokohama Advan Neova 195/50-15 (replaced with 048R in track)

AE111 4A-GE 5 Valves per cylinder (20V)
DLI Ignition with Freeedom ECU
Toda 272in/288ex 20V Camshaft (lift 9.8mm)
Toda Valvetrain
Toda 82mm Piston (11.3 Compression)
20V OEM Injectors 295cc
TRD Custom exhaust system
Aluminum 3 row radiator
Approximately 175bhp at flywheel

[Vladamor]

Thanks a lot friend!!

There are only a few pics of that car, and the most of the info is in japanese. Seems like you know very much about this car (and I'm sure about Keiichi too). Now I only need the AE111 head for the project. Waiting to www.model-meister.com release it again...

Thanks again mate. Take care.

REGARDS

[evil_hanzel]

Originally Posted by Vladamor

Thanks a lot friend!!

There are only a few pics of that car, and the most of the info is in japanese. Seems like you know very much about this car (and I'm sure about Keiichi too). Now I only need the AE111 head for the project. Waiting to www.model-meister.com release it again...

Thanks again mate. Take care.

REGARDS

no prob.
k-1's 86 is fairly easy to do, since most of his exterior is stock. only the rear hatch needs modifying for the kit.
actually the kouki bumper is just the late model stock bumper. fujimi and aoshima both released the late type or kouki version ae86. then you can get the front chin from the early type ae86.

pm me your email and i can send you the japanese ae86 brochure in pdf, where it shows the kouki bumper and redline tailights in detail.

theres also a video on youtube where thye show how they built up the keiichi ae86 from the ground up