Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-23-2011, 12:40 PM | #151 | |
AF Newbie
Join Date: Sep 2004
Location: Black Mountain, North Carolina
Posts: 58
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
Heres the thing. I thought if all 4 cams has the flats facing up, then their in time.
As you can see that one cam is not facing up like the other three. So why lock them, if the one is out? My thinking is take chain off, face the flat up, tighten new chain.
__________________
Dennis 2003 Mach 1 2008 Expedition King Ranch 4x4 2010 Taurus Limited |
|
02-23-2011, 01:10 PM | #152 | |
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
You might want to check with these guys, see http://www.jagservice.net/jaguar_v8_...tensioners.htm
Notice the bent valves, because of a broken chain. I talked to another Technician, he's said ''don't touch the chain, it will have a little slack.'' Last edited by danielsatur; 02-24-2011 at 12:32 PM. |
|
03-03-2011, 07:38 PM | #153 | |
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
HI 34FORD
Going by Black Mt, and going to the Smokies next week, did you get this car fixed? |
|
03-04-2011, 05:34 AM | #154 | |
AF Newbie
Join Date: Sep 2004
Location: Black Mountain, North Carolina
Posts: 58
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
Yea, put it back together last Saturday. She has driven it everyday since and sounds much better.
Still has a p0308 code.
__________________
Dennis 2003 Mach 1 2008 Expedition King Ranch 4x4 2010 Taurus Limited |
|
The Following User Says Thank You to 34Ford For This Useful Post: |
danielsatur (03-04-2011)
|
03-04-2011, 09:06 AM | #155 | |
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
Cool!
Troubleshoot P0308 - Misfire on cylinder 8 1) Look for a loose connection on fuel injector, and the COP going to cylinder 8. 2) Reset & clear code 3) Monitor 4) Do a Google ''Lincoln LS drive cycle'' If it come's back suspect: Cylinder 8 COP Spark plug Fuel injector Compression |
|
03-12-2011, 02:41 PM | #156 | |
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
Got back from Cherokee casino and Michael Bolten concert this morng, we flew by Black Mountain.
I was thinking about your problem and wonder if you got your DTC P0308 fixed yet? If cylinder 8 is still missing it could lead to a bad catalytic converter on bank 2(P0430). |
|
03-15-2011, 05:57 AM | #157 | |
AF Newbie
Join Date: Sep 2004
Location: Black Mountain, North Carolina
Posts: 58
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
Yea, I was out in the garage all day Saturday installing back up lights in my RZR.
Anyway the ole Linc's engine light went out and the wife said it been running fine. Go figure.
__________________
Dennis 2003 Mach 1 2008 Expedition King Ranch 4x4 2010 Taurus Limited |
|
09-28-2011, 01:19 PM | #158 | |
AF Newbie
Join Date: Sep 2011
Location: fayetteville, Arkansas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
have the same thing and checked everything. tired of this car. just checked cam timing and found bank 1 exuast cam off by a tooth. adj it and putting it back tougether now. crazy fhantom miss on cyl 4.
|
|
09-28-2011, 03:03 PM | #159 | |
AF Newbie
Join Date: Sep 2011
Location: fayetteville, Arkansas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
fixed the magic miss. check the cam timing. all 4 flats on the cam shafts have to be flat in line almost perfect had bank 1 ex cam off just a few degeres, caused the miss. there are no teeth on the gears to cam, so aparently they can turn on the camshafts. before you spend any money check first. all you have to do is pull the valve covers and turn the motor over.
|
|
09-28-2011, 04:09 PM | #160 | ||
AF Regular
Join Date: Nov 2003
Location: Gulfport, Mississippi
Posts: 394
Thanks: 0
Thanked 35 Times in 34 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
Quote:
Yours will jump again if you haven't fixed the real problem. The real problem is that the timing chain guides and tensioners wear out. |
||
09-28-2011, 04:20 PM | #161 | |
AF Newbie
Join Date: Sep 2011
Location: fayetteville, Arkansas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
misunderstanding not teeth on the gear for the chain. teeth where the gear and the cam bolt together. it's smooth so when you loosen the torx bolt the gear can turn on the cam. bolt torque is all that keeps it from moving, so if the torx bolt is not tight enough or something should happen that could jerk the gear or bind the cam it can turn. thus moving the exuast cam in relation to the gear changing the timing
|
|
09-28-2011, 04:46 PM | #162 | ||
AF Regular
Join Date: Nov 2003
Location: Gulfport, Mississippi
Posts: 394
Thanks: 0
Thanked 35 Times in 34 Posts
|
Re: just wont run right!!!!! 2001 cylinder 4 misfire
Quote:
|
||
|
POST REPLY TO THIS THREAD |
|
|