Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-18-2015, 05:34 PM | #1 | |
AF Newbie
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
1998 Intrepid -[Motor will not turn over}no start
We have replaced the pcm :
Still no motor turn over -no start ! New Battery and cables ! All-- fuses and relays-- were checked and are ok ! No ignition to the starter - motor will not turn over ! Jumper wire from control center starter relay -then motor turns over ! We are at a Loss here - Could it be the ignition switch? Neutral safety switch ? |
|
08-19-2015, 03:24 PM | #2 | |
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1998 Intrepid -[Motor will not turn over}no start
Help Guys ?
replaced TCM-Starter Switch ! Still nothing !!!!! HELP-HELP\HELP-HELP\HELP-HELP\HELP-HELP |
|
05-07-2016, 03:23 PM | #3 | |
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1998 Intrepid -[Motor will not turn over}no start
[b]We have replaced everything in the start up line sensors etc:
************************************************** **** We have spark to the coils but not to the plugs ?????????????? anyone have a clue? https://www.facebook.com/plugngo/med...7517163&type=3 Last edited by plugngoaz; 05-07-2016 at 03:26 PM. Reason: pic for reference |
|
05-08-2016, 01:38 PM | #4 | |
AF Regular
Join Date: Apr 2016
Location: McPherson
Posts: 125
Thanks: 0
Thanked 10 Times in 10 Posts
|
Re: 1998 Intrepid -[Motor will not turn over}no start
Do you have 12v going to your fuses? Find the starter relay you should have 12v on two points. try jumping across the relay and see if it cranks.
|
|
05-08-2016, 04:25 PM | #5 | ||
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1998 Intrepid -[Motor will not turn over}no start
Quote:
We were informed on the dodgeintrepid site --that we needed to put the driverside cam sprocket and the Flex plate from the old motor on this one ! So your saying try the relay jump? what after that ? |
||
05-08-2016, 04:30 PM | #6 | |
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
We were informed on the dodgeintrepid site --that we needed to put the driverside cam sprocket and the Flex plate from the old motor on this one !
So your saying try the relay jump? what after that ? ************************************************** ********** My Mistake --Wrong Year Listed for the Issue ! ************************************************** **** https://scontent-sjc2-1.xx.fbcdn.net...5b&oe=57A2B5AA Last edited by plugngoaz; 05-09-2016 at 09:10 AM. Reason: Wrong Year Listed for the Issue ! My Mistake |
|
05-08-2016, 07:26 PM | #7 | |
AF Regular
Join Date: Apr 2016
Location: McPherson
Posts: 125
Thanks: 0
Thanked 10 Times in 10 Posts
|
Re: 1998 Intrepid -[Motor will not turn over}no start
I'm a little confused did you do an engine swap? And why would you need to switch cam and flex plate? Not the same engine?
If it cranks when you jump the relay you need to check the small wire going to the starter. If you don't have 12v at that relay you need to trace it back further. Like I said check voltage on your fuses. |
|
05-09-2016, 08:50 AM | #8 | ||
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
Quote:
It is now in a 2002 Chassis ! Egr engine ! Converted to Non egr motor ! There is -[ supposed to be a difference in cam sprocket and Flex plate between the 2 Different years ! The tone rings ! There is a difference in Tone rings on 2 other years as well ! Last edited by plugngoaz; 05-09-2016 at 08:57 AM. Reason: Incorrect year for issue ! My mistake ! Corrected now ! |
||
05-09-2016, 08:55 AM | #9 | |
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
They say the cam sprocket and Flex plate Tone ring is different from the 2001 2.7 setup !
They say that the issue apply's to 2 other years as well ! |
|
05-09-2016, 09:01 AM | #10 |
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
|
05-09-2016, 09:04 AM | #11 | ||
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
Quote:
|
||
05-09-2016, 09:05 AM | #12 | ||
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
Quote:
|
||
05-09-2016, 09:07 AM | #13 | ||
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
Quote:
|
||
05-09-2016, 10:26 AM | #14 | ||
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Parker
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
2002 Intrepid -[Motor will not start ! pwr everywhere that it has to be !
Quote:
|
||
|
POST REPLY TO THIS THREAD |
|
|