Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
12-22-2003, 10:55 PM | #1 | |
AF Newbie
Join Date: Dec 2003
Location: Merrick, New York
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
97 yukon keyless entry
I have a 97 Yukon, keyless entry....the remote does not work at all, have changed batteries in both remotes, but still does not work....does anyone have a troubleshooting procedure...
|
|
12-29-2003, 03:29 PM | #2 | ||
AF Newbie
Join Date: Dec 2003
Location: Antwerp
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 97 yukon keyless entry
Quote:
1.Ground pin 4 to pin 8 of the DLC (Data Link Connector) The locks will lock and unlock within 2 seconds as a responce. 2. Press and hold the LOCK an UNLOCK buttons simultaneously, on the first transmitter to be programmed, until the locks cycle (+/- 10 sec) 3. Repeat step 2 for up to 4 transmitters. 4. Remove the ground applied to the DLC 5. verify the operation of the transmitters. The DLC is located under the steering wheel it is used to connect the OBD. |
||
12-29-2003, 04:05 PM | #3 | ||
AF Newbie
Join Date: Dec 2003
Location: Antwerp
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 97 yukon keyless entry
Quote:
I think you have to reprogram the transmitters. Thsi is how to do that: 1. Short pin 4 and 8 on the DLC (Data Link Connector) After about 2 second the locks will respond with a cycle (close - open) 2. Press and hold the locjk and unlock button on the first transmitter you want to program, until the locks cycle (about 10 sec) 3. repeat step 2 for each remote (up to 4) 4. remove the short on pin 4 and 8 5. TEST OPERATION The DLC is located under the steering wheel. |
||
06-23-2004, 08:02 PM | #4 | |
AF Newbie
Join Date: Jun 2004
Location: atlanta, Georgia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
These directions worked perfectly! I bought a keyless remote for my 1997 GMC Yukon on eBay for $15.00 plus $3.00 shipping. I used these directions to program it. For $18.00, I got a fully functional remote, which would have cost me about $100 at my local GMC dealer. Thanks for the info!
|
|
03-15-2006, 07:15 PM | #5 | ||
AF Newbie
Join Date: Mar 2006
Location: Kerrville, Texas
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 97 yukon keyless entry
Quote:
|
||
|
POST REPLY TO THIS THREAD |
|
|