Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
01-07-2003, 07:39 PM | #1 | |
AF Newbie
Join Date: Jun 2002
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
|
Transmisson
I want to put a older TH 400 in my 92 chevy 1500. Does anyone know if someone makes a adapter to go from a cable type trans to a electric spedo type gage?So I don't have to change out my gages. Thank's
|
|
01-07-2003, 07:56 PM | #2 | |
Blah blah blah
|
I don't have any feedback from these guys but let me know if you go through with it I would be iterested to hear how it works.
http://www.abbott-tach.com/cablex.htm If that is not what you are looking for ask the guys at this website. They do cable to electronic adaptions, they may be able to assist you with your project. hope this helps. http://www.tciauto.com/electronics/ BTW why are you wanting to put a thm400 in your truck? |
|
01-08-2003, 08:53 PM | #3 | |
AF Newbie
Thread starter
Join Date: Jun 2002
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
|
Trans
I want to change it out becouse I haven't had good luck w\it. It never really shifted good.I also broke 3 flywheel's and this last time i pulled it i found a crack in the case and when i would get on it hard the trans would act like it would go into neutral at 90 mph so it really sucked if i wanted to race.But if i brought the speed up slow i could go as fast as i wanted.But hopefully in a couple of years the motor will come out and a blown big block will be in it.After a narrowed rear frame and a narrowed rear end and tubs.But anyway thanks for the info and I'll let you know if i find anything out Thanks again
|
|
|
POST REPLY TO THIS THREAD |
|
|