Honda Cb750 racer Japanese version 1/6

slightfan · 07-10-2006, 06:45 AM

Well guys have had this one sitting around for a while now thought I would finnish this then ,I can devote my time to the other two WIP that I have going on here .
This bike is HUGE the pic of the frame ,the smaller one is the M1 frame.
Will try and take some better pic's

Shayne

quadzero · 07-11-2006, 01:27 AM

you certainly have one heck of a bike here. engine is fantastic. looking forward to more of this one.

cinqster · 07-11-2006, 02:35 PM

You've made a nice start but the Tamiya kit is rather inaccurate as they were really lazy on this one.

The tank should be fatter and more radiused and the bike ran with alluminium W section rims, which are far different to the stock ones that they couldn't be bothered to change. The racer also has a far larger rear drum than stock. I've got as far as rebuilding the rims and drum but not much further yet.

Modelcrafters.GP · 07-11-2006, 03:43 PM

I'm drawn to the cooling fins of the engine, gotta stop looking. How's the chrome plating on this kit?

slightfan · 07-12-2006, 06:03 AM

The chrome plating on this bike is good ,better than some of there later bikes.
And yes have to do some remodeling work on cowling and tank to do jJapenese version,If i can find anymore than the 1 picture that I have .
Looking forward to painting cowls as it looks like it should be on an fighter plane
(thought i gave them up years ago

.
Shayne

cinqster · 07-12-2006, 07:03 AM

Shayne,

I've got reference for the Dave Mann bike if it helps at all?

Let me know if you want them,

John

slightfan · 07-12-2006, 01:19 PM

Quote:

Originally Posted by cinqster

Shayne,

I've got reference for the Dave Mann bike if it helps at all?

Let me know if you want them,

John

That would be a help ,you have already sent them to me,but lost them
due to the stuipd email rogramme That I was using at the time

(bikenut2001) =Slightfan
Shayne

slightfan · 07-24-2006, 01:07 AM

have done a wee bit more on this ,next will be cowling and gas tank .
Will try and add some more detail but as i don't own a lathe will have to see what i can do

Shayne

Roca46 · 07-27-2006, 09:21 AM

Wow this bike is BIG

I love the colour of the front fender!!

Keep us updated!

slightfan · 09-14-2006, 05:33 AM

Well guys have finally made some progress on this beast.

Bike is done ,just a couple of little touch up here and there ,and have got main base coat on just have to mask off for the pattern of the version I'm doing so hopefully will be all done and dusted by this time next week

Thanks for looking
Shayne

Twowheelsrule · 09-14-2006, 02:08 PM

Looks cool! The detail on that model is wonderful and it seems to really give the feeling of the real bike.

Mark

BugZilla · 09-14-2006, 05:51 PM

It looks like its as big as the real bike

Dave

henk4 · 11-07-2007, 06:39 AM

it l,ooks like this thread somehow died, just at the point where I want some clarification. I did finish the kit, in the Daytona version and I spent lots of time getting a nice coat of paint on the cowling, (handpainted Tamiya X34, a bit too light probably but a nice colour). Then the big deception came when I had to apply the decals which look nice an glossy on the sheet, but once in the water they break into several pieces. I ended up sort of moving all the loose parts tight to each other, but on the curvaceous section where the number is located, the decals cracked and I had to fill the cracks with white paint. The decals did react positively to microset, but the damage had already been done. Looks OK from a distance, but should not happen with decals from a reissued kit. Furthermore there is also no white decal for the number on the front of the cowling....
This was a great disappointment as otherwise the kit was a nice one to build. (my first big scale kit) but indeed probably not perfectly resembling the actual racing machine..

Has anybody had similar experiences, and if so is there a way to ask Tamiya for a proper set of decals?

cinqster · 11-07-2007, 06:46 PM

Henk,

It sounds like you may have an old original kit if the decals have broken up. You're in luck though because Tamiya have re-released this kit in the last couple of years so they should have stocks of new decals, and they're probably reprinted by Cartograph and far superior than the originals (this was the case with my replacement CBR1100 decals)

Try ordering through your national Tamiya importer first - I'm guessing you're in Belgium, so I don't have a contact number. The UK supplier has ordered for me before but I've has to wait up to 8 weeks for parts.

You could also try these guys:

http://www.hlj.com/

or these:

http://www.rainbowten.co.jp/english/

Good luck!

henk4 · 11-10-2007, 04:34 AM

Quote:

Originally Posted by cinqster

Henk,

It sounds like you may have an old original kit if the decals have broken up. You're in luck though because Tamiya have re-released this kit in the last couple of years so they should have stocks of new decals, and they're probably reprinted by Cartograph and far superior than the originals (this was the case with my replacement CBR1100 decals)

Try ordering through your national Tamiya importer first - I'm guessing you're in Belgium, so I don't have a contact number. The UK supplier has ordered for me before but I've has to wait up to 8 weeks for parts.

You could also try these guys:

http://www.hlj.com/

or these:

http://www.rainbowten.co.jp/english/

Good luck!

well, I bought the kit from HLJ when it was reissued in 2002 or 2003, can't remember exactly but it is a re-issue, which is exactly the reason why I was so surprised to see the decals virtually disintegrate...(and I am in Holland)

I'll try HLJ again

POST REPLY TO THIS THREAD