 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-05-2008, 12:36 PM
|
#1 | |
|
AF Newbie
 Join Date: Jun 2008
Location: Philadelphia, Pennsylvania
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
|
94 sable/ No power at compressor
Hi All, I have a 1994 mercury sable with 3.0 liter eng. I replaced compressor cause it took a dump. Ran a vacume on sys for 40 minutes. When I started to put freon in the compressor was not comming on so I jumped the low pressure cut-out switch and still nothing. I checked wires at compressor and I have no power at all. I checked all fuses and all is fine. Is there a clutch relay or something that I might have missed Any Help would be Greatly Appreciated. Thank You In Advance
|
|
|
|
|
06-06-2008, 03:57 PM
|
#2 | |
|
AF Newbie
Join Date: Jun 2008
Location: Philadelphia, Pennsylvania
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 94 sable/ No power at compressor
Just to give everyone an up-date. Upon further testing it turned out to be a bad Body Control Module Cost around $100.00 bucks. So if anyone is having the same type of problem as me that gives you something to check. Thank you
 |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
