 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
06-16-2004, 01:12 PM
|
#1 | |
|
AF Newbie
Join Date: Jun 2004
Location: newnan, Georgia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
need new egr valve
I have been told that I need an egr valve for my millenia. Does anyone know where I could purchase this without it being so expensive?
|
|
|
|
|
07-05-2004, 08:40 PM
|
#2 | |
|
AF Newbie
Join Date: Jun 2004
Location: san diego, California
Posts: 29
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: need new egr valve
it has to be done at the dealer, very expensive
|
|
|
|
|
|
07-13-2004, 08:45 AM
|
#3 | |
|
AF Newbie
Join Date: Jul 2004
Location: Levittown, New York
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
I had my EGR valve replaced at my local mechanic, but the actual
EGR valve was ordered directly from the Mazda dealer. The EGR valve was $316 + $60 labor. Hope this helps ! |
|
|
|
|
|
09-20-2004, 12:23 PM
|
#4 | |
|
AF Newbie
Join Date: Sep 2004
Location: MINNETONKA, Minnesota
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
I have a 97 Millenia and they told me I needed a new EGR valve...It is spendy. Instead of putting in a new one I had them clean it w/ degreaser and a brush. It worked fine for approx 2 yrs. After that my check engine light started coming on again. I had them clean it and it's been another 1 1/2 years. It only cost around $50 to vclean it. You might want to try that.
|
|
|
|
|
|
11-17-2004, 01:03 PM
|
#5 | ||
|
AF Newbie
Join Date: Nov 2004
Location: Shelby, North Carolina
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: need new egr valve
Quote:
How did they clean it? |
||
|
|
|
|
08-10-2005, 02:59 PM
|
#6 | |
|
AF Newbie
Join Date: Aug 2005
Location: Evansville, Indiana
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Just take off the egr valve located on the passenger side rear of the engine. Spray some carb cleaner in it let it sit for a few seconds and then wipe it clean with a towel. You might want to spray a little bit inside the opening it bolts back onto and start ur engine to cut down on build up inside hte openings but this should take care of cleaning it.
In case this does not fix it you may want to check my new post that explains the fix to the egr replacement problem that plagues the mazda millenia. |
|
|
|
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
