Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-17-2012, 06:06 PM | #1 | |
AF Newbie
Join Date: Apr 2008
Location: High Point, North Carolina
Posts: 82
Thanks: 9
Thanked 0 Times in 0 Posts
|
03 Focus coupe ZX3 #4 NO FIRE
Here's the problem #4 cyl isn't firing . I put a new plug in and a new wire on, off my 02 Focus wagon (same engine.) I can pull the plug wire, stick a screw driver in the plug wire start the engine and hold the metal part of the screw driver I barely feel a slight tingle. I wouldn't try the other 3 they are throwing a good spark from the ends of the plug wire to any thing metal and if I pull any other wire off, the engine chokes down, but It makes no difference if the #4 wire is on or not. I know the original plug and wire are good because they are on my 02 Focus wagon and it runs fine. Should I replace the COIL PACK??????????
|
|
06-17-2012, 06:17 PM | #2 | |
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: 03 Focus coupe ZX3 #4 NO FIRE
Doe's this car have both a Coil On Plug (COP), and ignition coil?
see www.partsgeek.com If you got a COP, roll it to cylinder 1. |
|
06-27-2012, 07:46 PM | #3 | |
AF Newbie
Thread starter
Join Date: Apr 2008
Location: High Point, North Carolina
Posts: 82
Thanks: 9
Thanked 0 Times in 0 Posts
|
Re: 03 Focus coupe ZX3 #4 NO FIRE
I fixed the problem new coil pack.
|
|
|
POST REPLY TO THIS THREAD |
|
|