Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-23-2004, 09:01 AM | #1 | |
AF Newbie
Join Date: Aug 2004
Location: Des Plaines, Illinois
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
Power Lock -- Not working perfectly.
In my 96 Camry, I am getting a new problem. One of my rear door lock is NOT released when the central lock switch is pressed. This works sometimes and sometimes this is not. I have marked that when the vehicle is hot this is not working.e.g. After a long day parking in sun. But in the morning this is working great. Any clue?
Thanks, PK |
|
09-23-2004, 07:35 PM | #2 | |
AF Enthusiast
Join Date: Dec 2003
Location: Pittsburgh, Pennsylvania
Posts: 512
Thanks: 3
Thanked 2 Times in 2 Posts
|
Re: Power Lock -- Not working perfectly.
The linkage is probably gummed-up.Take the inner door panel off and spray the connections with penetrating oil then white grease.
|
|
11-14-2004, 07:09 PM | #3 | |
AF Newbie
Thread starter
Join Date: Aug 2004
Location: Des Plaines, Illinois
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
I am not really sure if this is due to any linkage problem or any mechanical problem. Now the lock is not opening at all. Of course when the switch pressed, the lock is trying to open, but could not do so. I was trying to get the door panel out, but I couldn't do so. Any idea how to get the door panel out. I found two big screw ( both are at the handle) and some small srews ( plastic ) around the panel. I have opened all, but still I could not open the door panel. Can anybody advise me how to open the door panel? Any diagram is of help.
Thanks, PK |
|
|
POST REPLY TO THIS THREAD |
|
|