Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-02-2012, 07:08 PM | #1 | |
AF Newbie
Join Date: Aug 2009
Location: starbuck, Minnesota
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
1999 chevy blazer 4x4 doesnt work
hi i am a new member
i have a 99 blazer that the 2wd light is on but when i press the 4hi button all it did was flash for about 5 min. and then go back to 2hi. i have replaced the transfercase motor with one from a junk yard but no change. fount out that there was no vacuum comming out of the switch on the firewall to engage the front axle. if i put vacuum on the actuator manually and then put the 4hi button it engaged. before i was able to replace the switch the service 4wd light on the dash came on and the lights on the push button went out. anybody have any ideas????? |
|
|
POST REPLY TO THIS THREAD |
|
|