Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Cutlass Series Includes Cutlass Ciera, Cutlass Cruiser, Cutlass Calais, Cutlass Supreme, Custom Cruiser, as well as the GM N-Body subforums. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-13-2005, 09:44 PM | #16 | |
AF Regular
Thread starter
Join Date: May 2005
Location: McKinney, Texas
Posts: 91
Thanks: 0
Thanked 0 Times in 0 Posts
|
Yes.
I pulled the car foward a few inches in the driveway not but five minutes ago, and once I put it in park the car's abs light came on. I put it back in drive then back into park, and then the abs light started blinking. When I restarted the car, the abs light did not come on. Something tells me this is either a fluke or expensive. |
|
06-14-2005, 06:51 PM | #17 | |
AF - Advisor
Join Date: Mar 2004
Location: Nashville, Tennessee
Posts: 2,920
Thanks: 112
Thanked 41 Times in 39 Posts
|
Re: Brake strength
Check your manuals for instructions on how to get ABS trouble codes. The places to jumper on the Diagnostic Port of a '92 Bravada is the top right and the bottom, 2nd from the LEFT then turn the keyswitch on. The ABS and BRAKE lights should come on for a coupla seconds then go off. At this point the jumper can be removed and a scan tool be connected to get the trouble codes. Do they apply to a '92 Cutlass? I don't know but it might.
Many Bravada ABS troubles can be traced to the wheel sensors but I really can't see them as making for a hard, unresponsive brake pedal. I wish I could be more help to you. |
|
06-15-2005, 01:52 AM | #18 | |
AF Regular
Thread starter
Join Date: May 2005
Location: McKinney, Texas
Posts: 91
Thanks: 0
Thanked 0 Times in 0 Posts
|
The ABS system doesn't seem to want to hold codes. Ever since then it hasn't come on. I'm hoping to gather the rest of the tools I need to replace the system fluid saturday. I'll post then; hopefully that will be the problem.
|
|
|
POST REPLY TO THIS THREAD |
|
|