Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-12-2003, 01:40 PM | #1 | |
AF Newbie
Join Date: Feb 2003
Location: Naples, Florida
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
96 ES300 Keyless Entry Programming???
Help!!
I need the key programming instructions for my '96 ES300. I have them for 1998 but I think they are different 'cause they don't work.
__________________
Regards, Don don@tigerpilot.com |
|
05-17-2003, 11:41 AM | #2 | |
AF Newbie
Join Date: May 2003
Location: anniston, Alabama
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hello. Did you ever figure this out! I have a 1993 and need the same info?
|
|
06-23-2003, 10:07 AM | #3 | |
AF Newbie
Join Date: Jun 2003
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
1993 KEYS CAN NOT BE PROGRAMED
1996 SHOULD BE AS FOLLOWS UNLOCK DOORS- OPEN DRIVERS DOOR-INSERT KEY IN IGNITION & PULL OUT-LOCK & UNLOCK DOORS 5 TIMES W/DRIVERS SWITCH-CLOSE DOOR-OPEN DOOR-LOCK & UNLOCK 5 TIMES AGAIN-INSERT KEY IN IGNITION & TURN ON THEN OFF ( DO NOT START CAR ) PUSH BUTTON ON KEY FOR 2 SEC.-CLOSE DOOR-OPEN DOOR &PUSH BUTTON AGAIN ! THIS SHOULD WORK , IF NOT MAKE SURE BATTERY IN KEY IS GOOD. |
|
10-29-2003, 02:54 PM | #4 | ||
AF Newbie
Join Date: Dec 2002
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 96 ES300 Keyless Entry Programming???
2 Quick Questions. Does this method work for a 1995 ES300? And the second question is: does this work for a key that is not cut for the car? I have a different keyless entry key; can I simply follow this procedure, using the working key to turn the ignition?
Thanks Quote:
|
||
10-29-2003, 03:46 PM | #5 | |
AF Newbie
Join Date: May 2003
Location: anniston, Alabama
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
I believe it should. It does not matter on the cut of the key. I do know that like my year car (1993) has a chip in the key and near the antenna and has to have matching chips to work
|
|
11-03-2003, 02:45 PM | #6 | ||
AF Newbie
Join Date: Dec 2002
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 96 ES300 Keyless Entry Programming???
Well I tried this method on my 1995 ES300, and I can confirm that it definately will work. I now have 2 master remote keys that work for my car, even though I got them off of a different car, so the cut is totally different - at least the keyless entry works.
Thanks!!! Quote:
|
||
11-12-2003, 02:19 AM | #7 | |
AF Newbie
Join Date: Nov 2003
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 96 ES300 Keyless Entry Programming???
Obviously many who would like to know concidering this thread has been read 400 times!
Including me and my 94 ES. Anyone called Lexus 888-25-LEXUS? |
|
02-20-2005, 01:15 PM | #8 | |
AF Newbie
Join Date: Feb 2005
Location: Bellevue, Washington
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 96 ES300 Keyless Entry Programming???
i bought a new key from this lexus-parts website, and will the programming procedure work for that new key?
|
|
02-20-2005, 09:05 PM | #9 | ||
AF Newbie
Join Date: May 2003
Location: anniston, Alabama
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Re: 96 ES300 Keyless Entry Programming???
Quote:
|
||
02-21-2005, 05:56 PM | #10 | |
AF Newbie
Join Date: Feb 2005
Location: Bellevue, Washington
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 96 ES300 Keyless Entry Programming???
NVM, i programmed the key just by following the steps, BUT, to make it clear, when u hear the beep, press the buttom for at least one sec then release, its gonna beep like 3 or 4 times, then after its done beeping, close/open door, then press the buttom again for at least one sec, and then wait 20 sec and try ur key. the key should work....
i got 96 es 300...and just done a 60k maintainese...and its $500 bucks....coz 60k has longer list than 90k...lol |
|
02-21-2005, 05:57 PM | #11 | |
AF Newbie
Join Date: Feb 2005
Location: Bellevue, Washington
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 96 ES300 Keyless Entry Programming???
and that maintainese doesnt even include replacing spark plug and $60 for replacing a fog light bulb?....its so not a rip off, its a damn robbery!!
|
|
02-21-2005, 10:06 PM | #12 | ||
AF Newbie
Join Date: May 2003
Location: anniston, Alabama
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Re: 96 ES300 Keyless Entry Programming???
Quote:
|
||
|
POST REPLY TO THIS THREAD |
|
|