 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-06-2008, 09:34 AM
|
#1 | |
|
AF Newbie
Join Date: Apr 2008
Location: Sycamore , Illinois
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
1993 Probe Trans/clutch problem
Having a problem with my trans. While traveling at 55mph. my trans just seemed to disengage. It will go into gears and speedo will move with it but no power getting to wheels. Any ideas?
|
|
|
|
|
04-06-2008, 09:56 AM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Apr 2008
Location: Sycamore , Illinois
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Update
After having the car towedfor $100 and sitting overnight, I started it up and everything seems to be fine.
 I am afraid to drive it and have it happen again. Anything i should be looking at, because I have no clue?!! |
|
|
|
|
|
04-19-2008, 09:02 PM
|
#3 | |
|
AF Newbie
Join Date: Apr 2008
Location: Ferndale, Washington
Posts: 85
Thanks: 3
Thanked 0 Times in 0 Posts
|
Re: 1993 Probe Trans/clutch problem
what engine and type of tranny do you have? more info helps get dio's
__________________
1997 Honda Accord 2003 F250 6.0 ps cclb 2016 jeep patriot |
|
|
|
|
|
04-23-2008, 11:19 PM
|
#4 | |
|
AF Newbie
Thread starter
Join Date: Apr 2008
Location: Sycamore , Illinois
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1993 Probe Trans/clutch problem
The problem was solved. turns out whomever installed the halfshaft overtightend the axle/hub nut and pulled the shaft from the trans. A new ring clip on the trans side and WALA!! problem solved. But to answer your question... It has a 2.2 stock with a 5 speed manual. Now i'm having problems with the caliper on the same side sticking and burnin the brakes. never ending!
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
