Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-20-2004, 04:37 PM | #1 | |
AF Newbie
Join Date: Aug 2004
Location: bedford, Indiana
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
need help! gettin cams timed with engine(95 2.0 ztec)
Hello, my head cracked on my 1995 mystique ztech 2.0, and i purchased a used head from a car recycler, but here is the problem, i dunno what possison the pistons were on the parts car i got the head from. I've sat my motor at top dead center, now how do i get the cams? There is no marking on the cams or cam gears for TDC. someone please help im lost(o ya also does anyone know what the head bolts needs to be torqued to)
|
|
11-18-2006, 01:29 PM | #2 | |
AF Newbie
Join Date: Nov 2006
Location: chester, New York
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: need help! gettin cams timed with engine(95 2.0 ztec)
First be sure that your #1 cyl. is at top dead center.Get yourself a piece of flat sleel about 1/8 in. thick. turn cams until both line up and you can put the steel in the grooves at the end. It can only go one way.
|
|
11-19-2006, 04:07 AM | #3 | |
AF - Advisor
Join Date: Aug 2004
Location: Pinole, California
Posts: 2,276
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: need help! gettin cams timed with engine(95 2.0 ztec)
The thread is over two years old.
|
|
|
POST REPLY TO THIS THREAD |
|
|