Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-24-2010, 03:20 PM | #1 | |
AF Regular
Join Date: Jan 2005
Location: Jenison, Michigan
Posts: 103
Thanks: 0
Thanked 0 Times in 0 Posts
|
rear hub assembly change out
I have to change out a rear hub/bearing assembly. Will I need a hub puller to remove the old assembly? I know you need one for the front ones as I have done them before, but didn't know if you also needed the puller for the rear ones.
|
|
06-01-2010, 11:24 PM | #2 | |
AF Newbie
Join Date: Jun 2010
Location: Carpentersville, Illinois
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: rear hub assembly change out
I actually replaced my front right hub assembly with no hub puller. I just disconnected the strut from the hub and the other bolts holding it in place and was able to yank it right off. I don't see why you would need one for the rear, if they're the same as the front....
Just my thoughts :-) |
|
|
POST REPLY TO THIS THREAD |
|
|