 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
09-28-2007, 04:43 PM
|
#1 | |
|
AF Newbie
 Join Date: Aug 2007
Location: Orlando, Florida
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
|
How do I install new radio?
I need to take out the stock deck and put a new one in....how do i take it out?
|
|
|
|
|
09-30-2007, 02:42 PM
|
#2 | ||
|
AF Regular
 Join Date: Sep 2004
Location: Woonsocket, Rhode Island
Posts: 299
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: How do I install new radio?
Quote:
__________________
  1998 RS 5 speed, Stock front bumper w/molded urethane lip, Blitz side skirts, Bomex rear, JSP Carbon Fiber hood. Halo Projection Headlights, Escort radar detector, Turbo style spoiler, 1,200 watt sound system with 2 dual 12 subs, 20% executive tint, 17" sport rims, Custom built 2 1/2 Exhaust, OBX 4-1 Header, CAI, KYB GR-2 struts, Sprint lowering springs. |
||
|
|
|
|
11-17-2007, 10:59 PM
|
#3 | |
|
AF Newbie
Join Date: Aug 2007
Location: Orlando, Florida
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: How do I install new radio?
I figured it out. You have to pull of the A/C knobs with pliers and unscrew the screws behind the knobs. Then you have to take a screw driver or something like that and pry it along the outside of the panel around the radio. Wrap it with tape so that it wont scratch the panel. Slowly work your way around the panel so that you can loosen all the clamps holding on. When you get to the last few, it should pop right off and you can then unscrew the radio and take it out. When you install the new radio, either buy a wireing harness or hardwire it straigh in. But hardwireing it, as i found out might void the warranty of the radio if you have one or w/e.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
