Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-24-2006, 05:36 PM | #16 | |
stupidity should hurt
Join Date: Aug 2004
Location: Flint, Michigan
Posts: 10,129
Thanks: 2
Thanked 22 Times in 22 Posts
|
Re: Crankshaft Postition Sensor replacement procedure?
The oil pressure sending unit, if bad, will cause the car to stall and not trip a CEL or code. There is a safety feature built in that will kill power to the fuel pump and ignition module if the oil pressure reading drops below 4psi at idle.
__________________
Still waiting for the "good old days" I'll get to bore my future grandchildren with! |
|
08-24-2007, 02:39 AM | #17 | |
AF Newbie
Join Date: Aug 2007
Location: N. of Dallas, Texas
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Crankshaft Postition Sensor replacement procedure?
Same trouble for me and my '95. 6mm bolts were too small I ended up geting 1/4 bolts with a 28:1 thread. Worked fine. Probably messed up the threads in the Harmonic Balancer but I'll only need to remove it one more time anyway
__________________
95 Bonneville 3800 Non-Turbo 200K+ Miles Purchased 2004 for $1K Not one moments trouble with it until 8/07 |
|
09-04-2007, 07:52 PM | #18 | |
AF Newbie
Join Date: Sep 2007
Location: Warren, Massachusetts
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Crankshaft Postition Sensor replacement procedure?
i'm having the same issues with my 1995 bonneville driving down the road it will suddenly drop voltage and the buzzer (the same one as when the fuel is low) goes off and the car dies for a second and then catches itself and keeps going and the CEl comes on. but if it's idling it ussually stalls out. i tried replacing the IAC and TPS sensors and no change i checked all the gronds also.
|
|
|
POST REPLY TO THIS THREAD |
|
|