Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Engineering/Technical Ask technical questions about cars. Do you know how a car engine works? |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-20-2004, 12:31 PM | #1 | |
AF Regular
|
ZC engine bogs out.. code 7/14
My engine was running well until yesterday. It has had code 14(EACV) and 7(TPS). Even with the codes it was running very well ( 9.7 in the 1/8th). After the car warms up it would bog when i went Wide-open-throttle. then it bogged from about 3000 rpm and up. i replaced the wires. I've check most everything except distributor. (about to do that)
I'm thinking i have a break in a wire and it's getting warm and seperating but don't know... ANY HELP?????????? |
|
03-20-2004, 01:12 PM | #2 | |
AF Regular
Thread starter
|
Re: ZC engine bogs out.. code 7/14
i've now check Coil and distributor while hot nothing...... It only bogs when under load (while in gear) and i can "roll" the throttle and it will be ok but if i step on it fast it just bogs out.
|
|
03-24-2004, 07:02 PM | #3 | |
AF Newbie
Join Date: Mar 2004
Location: tucson, Arizona
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ZC engine bogs out.. code 7/14
did you get the codes from your ECU or from a diagnostic scanner
|
|
|
POST REPLY TO THIS THREAD |
|
|