Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-07-2015, 03:39 PM | #1 | |
AF Newbie
Join Date: Aug 2015
Location: Tallahassee, Florida
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
89 crown victoria tailshaft has a hole in it
Could I just replace the tailshaft or do I need a new transmission and could I replace it myself or do I need to take it to a shop thanks and god bless....
|
|
09-07-2015, 06:27 PM | #2 | |
AF Enthusiast
Join Date: Oct 2011
Location: Ft Lauderdale, Florida
Posts: 953
Thanks: 13
Thanked 121 Times in 120 Posts
|
Re: 89 crown victoria tailshaft has a hole in it
That's an AOD trans. There's the tailshaft housing, rear shaft support bushing,rear seal,housing mounting gasket. Sensors in the housing to be removed and installed in the new housing. The trans has to be removed for access.
|
|
09-07-2015, 06:49 PM | #3 | |
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Tallahassee, Florida
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 89 crown victoria tailshaft has a hole in it
So as far as needing a new transmission...all I have to do is drop the transmission and check to see if the yoke or drive shaft is bent first...and then change only the bell housing and I'm good
|
|
09-07-2015, 06:53 PM | #4 | |
AF Newbie
Thread starter
Join Date: Aug 2015
Location: Tallahassee, Florida
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 89 crown victoria tailshaft has a hole in it
So what do you think cause the hole in the drive shaft...because I was getting some vibration when I started driving but it went away after a few seconds. ..and also will it be hard to change the tailshaft housing. ..thanks so much for your help..
|
|
09-07-2015, 07:37 PM | #5 | |
AF Regular
Join Date: Aug 2015
Location: Chengdu
Posts: 104
Thanks: 15
Thanked 3 Times in 2 Posts
|
Re: 89 crown victoria tailshaft has a hole in it
then take it to a shop. Good luck.
__________________
[Signature removed by moderator] |
|
|
POST REPLY TO THIS THREAD |
|
|