Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-21-2017, 05:34 PM | #1 | |
AF Newbie
Join Date: Oct 2012
Location: Pembroke Pines, Florida
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Replaced Wiper Arms - Do not work correctly
I replaced the wiper arms and wipers on a 1998 Mercury Grand Marquis, using GENUINE PARTS from a Ford Dealer.
The problem is when the wipers are off, they are parked about 1/2" from the bottom of the windshield frame. Please let me how could adjust the wiper arms, if possible. Thank you. |
|
01-22-2017, 01:46 PM | #2 | |
AF Enthusiast
Join Date: Aug 2004
Location: Porter, Indiana
Posts: 890
Thanks: 7
Thanked 74 Times in 72 Posts
|
Re: Replaced Wiper Arms - Do not work correctly
The arms are attached over large pins with small teeth. Take them off and put them back on again one tooth farther up. If that is not enough movement, continue the rotation of placing the arm on one tooth further until it is in the position you want.
|
|
01-22-2017, 03:07 PM | #3 | |
AF Newbie
Thread starter
Join Date: Oct 2012
Location: Pembroke Pines, Florida
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Replaced Wiper Arms - Do not work correctly
I cannot do it that way, because each wiper arm has a clip to match with a guide.
|
|
|
POST REPLY TO THIS THREAD |
|
|