Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
12-07-2006, 10:43 AM | #1 | |
AF Newbie
Join Date: Jan 2006
Location: Saginaw, Michigan
Posts: 90
Thanks: 0
Thanked 0 Times in 0 Posts
|
99 Bravada, binds up and hard to turn
When making sharp turns into or out of a parking spot, driveway. etc it gets hard to turn and the drivetrain is binding up really bad. Just like if I had my blazer in 4 wheel drive and did the same manuvers. There is no chattering or anything like that. Just feels like the clutches in the T-case arent slipping. Any ideas?
|
|
12-07-2006, 07:43 PM | #2 | |
AF Premium User
Join Date: Jun 2005
Location: meridian, Idaho
Posts: 2,067
Thanks: 7
Thanked 27 Times in 27 Posts
|
Re: 99 Bravada, binds up and hard to turn
find a dirt field or an icey, snow covered parking lot. something with a low traction factor and try it there to see if you can duplicate or worsen the problem. if not you may just have a bad power steering pump or a bad CV joint.
so what did it turn out to be when you had a simular problem on the blazer? |
|
12-08-2006, 04:58 AM | #3 | |
AF -Advisor
Join Date: Jan 2006
Location: merritt island, Florida
Posts: 661
Thanks: 0
Thanked 2 Times in 1 Post
|
Re: 99 Bravada, binds up and hard to turn
Change the transfer case fluid as it requires the blue GM AutoTrak fluid thats syn and about $7/qt - takes 2 - a bulletin on this that says clutch chatter etc so change, drive 100 miles and change again - thats 4 qts total. Could of course be the front CV joints so jack up under the lower control arm and spin the tire/wheel and see if binding/poping on either side.
|
|
|
POST REPLY TO THIS THREAD |
|
|