want to turbo b16a1 in 91 hatch. NEED HELP!!!

[Schister66]

Originally Posted by ssj155trunks

and with all of this tuned i hope to get 275 to 300 horse at 9 to 10 psi what do you think?

you're not going to reach that power goal on an 18g w/ a Greddy cast manifold. You'll have fun and probably hit into the 220-240whp range, but i doubt you'll get any higher than that on the stock map sensor. You will have quick spool up, fast recovery and good low end torque.

HORSEPOWER ISNT EVERYTHING

Also, $1450 isn't a bad price, but i could have stretched it further....if you continue to build setups, you'll start kicking yourself for things you bought in the past. I do it all the time. It is a great setup to start with and you'll learn and grow from here....good buy!

[ssj155trunks]

so how much are you asking for the intercooler? and what kind is it? and thanks for the info and ur right im just tryin to make it quick and thats not bad ill probably keep in touch for more info thanks again man.

[ssj155trunks]

you think you could get me any pics of this setup. oh and damn their harsh on that forum i just saw a forum talkin mass crap about me but its cool cause it was all settled.

[ssj155trunks]

oh yeah what was this intercooler for and would it fit on my 91 hatch b16a1 swap.?

[Schister66]

Originally Posted by ssj155trunks

oh yeah what was this intercooler for and would it fit on my 91 hatch b16a1 swap.?

its not really FOR anything in particular....its an intercooler. It is 31x6x3 w/ 2.5" inlet/outlet

yes it should fit your 91 hatch

[ssj155trunks]

does the the upper end of the piping have the flange for the b.o.v. and my email is [email protected] if you have pics. thanks man and you said 200 shipped right.

[ssj155trunks]

i have a couple questions for you. maybe you can help . will my stock downpipe bolt up to my turbo mani and i dont have the cash until i sell a couple things so would my vafc 2 vtec controller work as tuning for my turbo for a month or so? thanks for any help man.

[808hardbody]

no.

[Schister66]

Originally Posted by 808hardbody

no.

agreed...none of that is a good idea. If you're going to cheap out, dont boost....its that simple

[ssj155trunks]

right thats cool cause i just figured out how to wire in the new o2 sensor and to get a distibutor four my obd 0-1 conversion. and ill just search the forums for the downpipe . thanks guys. if you see any good deals let me know. thanks again.

[Schister66]

talk to Project DC2....you may have to send him your manifold to get the DP made, but you know that you cant just snag any downpipe off HT and expect it to work right? You have to have the specific one made for your turbo and your manifold....PM him and see what he can do for you....